Separate names with a comma.
Some features disabled for guests. Register Today.
I'll check that right now.
How about the calculate in the GRBL settings? I looked and Steps were all set to $100=199.100 ;X-axis steps per millimeter $101=199.100 ;Y-axis...
I am trying to do 2 sided milling and I drilled out 4 holes in the spoil board and then 4 holes in the stock to use with alignment pins. The...
it is :)
Yes where the tear-out is is where the bit enters the wood.
""
Hi Sorry if this is the wrong place to post this but I didn't know where else to post this. I keep getting tear out o in open pockets on the...
Turned off the machine, then back on , home and using a 1/4 inch bit did an XYZ probe and it worked as expected. Changed the bit to 1/8 inch bit ,...
Hi My machine was running fine until today. I put an 1/8th inch bit in started Probe Z axis then I get an alarm telling me the travel limit has...
Never mind I figured it out.:thumbsup:
If you have no experience and just want to learn CAD/CAM why not go get Fusion 360? It's free for none commercial use and it's really powerful. A...
Hi So after I HOME my machine it says on the Interface screen... X 80mm Y 30mm X 0mm Only reason it says that is after homing I pressed Zero...
I was told here it is a security device and not a Ferrite core. Yes it matters where you put a Ferrite core. Sure you might get lucky by just...
Ok I was wondering what that thing was. So did you make a cord for that router? What did you use and was it easy? Does the Makita have a ground...
I did some research on EMI. This video was pretty good. How do EMI Filter Chokes Work? [MEDIA] The shielded cord blocks the EMI and it's sent...
This ? " You can replace the makita cable very easily take the top cover off and there are screw terminals, replace the cable with shielded 2...
Hey pretty sure I found the problem with the Backlash. It's was mainly on the Z axis. I hadn't installed the set screw (grub screw?) in the anti...
Yeah I noticed while messing with them you have to find the sweet spot.
So you are saying I have a backlash problem with this machine. Like I said I have the Lead 1010 It has the all the nut blocks and an anti backlash...
It's got 2 and is listed as Double insulated. Makita USA - Product Details -RT0701C I have a DIY Swing Arm.
