Separate names with a comma.
Some features disabled for guests. Register Today.
Hi Everyone, To date I have been experimenting with cuting only MDF on my Lead 1010. Last night I tried to cut plywood with horrible results;...
Hi all, I have used various feed and speed calculators and I am getting various results (see below). the end mill that I am using is a 1/4" 2...
Hi Guys, I am currently decorating my sons bedroom who is an avid Leeds United fan, I have made him a new headboard for the bed and there will be...
I picked up this 1" surface planing bit on Amazon to face my spoil board. [ATTACH] From a couple of calculators, I have come up with around...
...and feed tables/charts in the recourses section. Also, searching the forums is helpful. Search Results for Query: speeds and feeds mdf |...
Sam...looking at building a 4x8 myself and just came across this...awesome build! Wondering what types of feeds and speeds you can do with a 1/4...
I’m running a job fight now on mdf and I think my speeds and feeds are way too conservative. Is there a way to bump these up while the job is...
@Kyle Barrett If everything is lining up and joining perfectly, then i think nothing is mechanically slipping as objects would look deformed and...
Hi @jeffmorris I have access to nice slabs of oak which will make some nice signs eventually but seeing as I'm only a novice at this game I aint...
Grbl allows feed overrides of 50%->200% (Half as slow to twice as fast) Any changes beyond that: 1. Stop the job 2. Edit the Feedrate in GCODE...
I have experience with MDF not Acrylic For engraving MDF I use a 60 deg Vbit. Works great with the Vetric Software. If you are cutting a groove...
I've never actually calculated the chip loads. I've simply tried a number of router speeds and feeds and settled on 12,000 RPM @100 IMP as a good...
Watch some videos on the subject.. They will deep dive it more than I will do here. Buy some tools. Research speeds and feeds for the type of...
Just revisting speeds and feeds...Making sure I am understanding... I cut pine and MDF...I use a Makita router at 30000 rpm and carbide two flute...
H Hi Marcus, Thanks you very much for the info, will give me a good starting point once machine is up and running. It's just arrived so...
"Unfortunately this is where compromise has to come into the equation." You have a formula for compromise? LOL "The ideal speeds and feeds...
Thanks for the tip Steve. Mmm, at the moment I have only up cutters reasoning that it removes the chips better, hence removing heat. For cutting...
Being still new to all of this can anyone give me a little insight to speeds and feeds through MDF for the following tools...I've have read that...
Bed area is 1000mm x 920mm Cutting area is ~850mm x 840mm, this is dependant on your spindle and skirt if you are using an extractor. I used...
A question for whoever can answer it. It's about speeds and feeds. Material MDF Bit: 1/4" Upcut Spiral 4 flute carbide Chip load between 0.006"...
