Separate names with a comma.
Some features disabled for guests. Register Today.
In fact I did, see file attached.
I lowered the feed rate from 105 to 42, the plunge rate from 42 to 10.
OK Kevon, David,
I understand now what you mean, and you’re right, Stiffnes is important, I will see what I can do.
Thanks a lot,
I have doing home research and have bought the Arduino R3 in 2013
The chip on it is a “atmega16u2” Driver Version 126.96.36.199 VID 2341 PID 0043...
First of all, thank you all for your effort to look into this and of course your comments.
The Arduino that I use is behind...
Enclosed you will find the Gcode.
I hope this is the right place to put my question…
Last Saturday I had problems with my CNC Sphinx XL…
I’m using an Arduino board with...
I think it is: 8lbs 52oz
It seems that the drivers come from the company ACT Motor. ( DM542 two-phase hybrid stepping motor driver )
The description of the...
On eBay I ordered 4 x DQ542MA drivers.
Today the postman have brought me the package but was surprised that they have send me DM542...
After getting prices from local workshops, also I did my purchase at Chris Laidlaw.
It seems that the prices in Belgium ale much higher than when...
Thank you very much for the explanation, it is clearly written and understandable, also the grandma story is something I will remember me.
I’m going to build a cnc machine like the Sphinx XL version, most parts are ordered and I’m waiting for the delivery’s.
In the meantime...
correction >> C'est la vie.
Thanks a lot Kyo, this should be enough !
Thanks for this information !
Wow, thank you for sharing this with us, I will keep this in mind.
Can you please explain a little bit more about the "Z axis direct drive to belt...
Thanks for your reply, no problem at all..
I saw this eBay-link before, showing 3mm Stainless Steel plates. (coming from the UK)...
I have another question, would it be possible to share the drawings of the extra large gantry plates?
(dxf / .f3d / .stl files)...
Thanks a lot, now I'm sure I'm on the right track :)
I’m looking to build also a CNC machine with +/- 1000 x 1000 dimensions.
At the moment I’m drawing in Sketchup the same setup...