Separate names with a comma.
Some features disabled for guests. Register Today.
Do you have the VFD connected into the same mains circuit/powerstrip as the controller? I've seen unusual things happen when they aren't
a numerical limit of x/y/z for the machine, Read the grbl documentation for a lot of great information gnea/grbl and if you aren't using a grbl...
The document tells you how to tune the values up to the fastest rate your system can handle
What controller are you using? Blackbox or another grbl based controller? See gnea/grbl on how to set $110-112 and $120-122
A Nema 23 isn't much more in cost but would provide much more torque than a Nema 17.
no, the Blackbox is grbl based and Mach4 does not support grbl. You can use other grbl gcode senders if you wish, UGS, bCNC, are a couple for free.
that all depends on what you mean by 'buggy', ie. what issues are you having?
you can also look into using bCNC though I have found I would rather not get my Mac full of dust in the shop so using a Raspberry Pi 4, a 3 will...
NEMA 23 Stepper Motor
scroll through the pictures and you will see the wiring diagram.
Best bits is so subjective. It just depends on what you are looking for and what is loaded the most often for the cut. I use Whiteside, Yonico and...
Thank you for the response and adjustments
correct, I gave the wrong keycode in my reply...
I mark the text, do a command-C, go to another window, email, open vi session or such, hit...
Deleted items to keep this one short, thank you for the responses to the other items.
I tried the various Mac methods, I can "mark the text, but...
On a Mac, is there a way to get a copy of the serial console log.
A couple items:
On a Mac when opening the serial port list fo connect, I can not see the full names in the list, the right side it cut off until...