Separate names with a comma.
Some features disabled for guests. Register Today.
whats wrong when the "Xtreme Solid V Wheels " break
to much torgue ?[ATTACH]
i have no experience with it
i only see what you became when you buy a lead screw
thats why i ask
i try it and orderd the F8-16M axial...
but one question
is too much tension good because thermal expansion
all other lead scre have two mounting blocks
one fix and one (sorry...
thx for your support
when i didnt have the 1 8 X 21 X 2mm AXK0821 Thrust Needle Roller Bearing With TWO Washers Each
can i turn the endplate so...
And why loctite the bearings in the end plate
Thx for your Answer
But my englisch is Not so good
So ist try to follow you
Please send me a pic so i can See What you mean
end in the videos are no bearings at the end of the c-beam
are the not needed ?
first and second video:
OK there ist the lock collar on the other side of the lead srew
so you can make tension
but on the orignal c-beam there is...
I have the problem of whiping lead srews
but my rapid travel speed is 3000mm/min
but i want to go faster but then the lead screw stucks
OK I will buy the the Timing Belt and Pulleys an will try it
and send you infos/Pics
I Think about one Motor at the middle with two timing Pulleys on the Motor axis
one belt for the left and one for the right lead screw
so that the...
has anybody experience with 2-xaxis but only with one motor
now i have two motors and sometimes i loosing steps on the slave axis
so i want to...
I think the 250mm and 500mm 8mm acme is good
But the 8mm x 1000mm acme is to soft
So I want to check the 12mm
must i use acme or can i use ballscrew too
what ist the advantage of acme
Sorry my english is not so good
my question is it possible to use a 12mm acme lead screw in c-beam
because the 8mm 1m long are very soft i...
My question is how fast can i go with c-beam and the standard motors
Mm/min i mean
Now my fastest setting 4000mm/min
Problem is that when i go...
Ok is there any other which is not so expensiv or free
Thx for reply
I look about fusion 360
But it supports only 3 axis machines
is there a Cam which supports a 4th Axis for Rotary
Thx for the video
But now im not sure
In the Video with 5.5 watt only one pass is needed
Need i now only one pass or 20