Separate names with a comma.
Some features disabled for guests. Register Today.
200617 CNC - Masso Battery Install and Look Inside
200617 CNC - Hyatt Gets a Touchscreen - Masso Firmware Install
I haven't been here for a while but I'm still chugging along. I decided to replace my custom grbl board with Masso G3 controller. Here's my first...
190916 Valve Studio - Finger Joint SUCCESS
So I'm back to making my speaker cabinets again. I'll post a video of that soon. In the meantime, here's a build video you might like,
Thanks Adam. I'm still working out the details on vacuum clamp work piece fixturing. Also I only have 2 clamp in place, I might need 4 for a...
Almost ready to actually make a speaker cabinet. Here's my solution to route the box joints on my Openbuilds Workbee1010.
Managed to burn out my first end mill this morning and crashed my Hyatt machine twice. What a morning!
Its an exciting moment this evening, hyatt is cutting!!!
Craig Hollabaugh published a new build:
I'm conducing guitar loudspeaker cabinet fabrication technique research (material type/thickness,...
My Hyatt machine will assist in guitar speaker cabinet fabrication including single and multiple speaker (2, 4, and 6) designs.
I figured out that the clunk-clunk-clunk motion issue was due to a rather inefficient LCD I2C driver. Wrote my own driver that reduced 63mS of CPU...
CNCMD, you're absolutely correct. Brand new not-worn lead screw blocks also a major reason. Thanks for watching and the comment.
Here I'm answering viewer questions.
I'm back with Y-axis performance. This time in inches.
Thanks for the encouragement. I'm about to mount the spindle, yay! Sure its been long, I'm having a great time and love the shop time tinkering.
I spent a couple days tweaking and here's some full X-axis excursion results.
I'm seeing 1/1000 resolution, that's not 1inch/1000 but 1mm/1000 = 0.001mm movements! Wow! Please check this out and tell me what I'm doing wrong....
Here's the next build log installment. You can skip over the problems and solutions I've found and watch the good stuff at 21:11. Thanks for...
No lift yet. I've been addressing performance issues with the PSoC5 grbl port and my little additions for stand-alone (computer-less) operation....