Separate names with a comma.
Some features disabled for guests. Register Today.
Multimeters "average" so short pulses look lower. Oscilloscope rather. Remind me on Monday, i can actually set that up. Would make a cool...
No I mean tbeir specified feeds and speeds. So having a belt driven machine, are you scaling down accordingly, as surely their specs are for...
We run stock standard Grbl from github.com/gnea/grbl
Speak to https://openbuildspartstore.com/contact-us-form/ thanks
There is actually already a TVS section onboard. Still bad practice (:
Bad wiring or damaged input pin on the arduino (replace it)
1) try a different computer (i have a Nextion 10 inch windows tablet who also has terrible USB ports. My other 10 inch Pipo works great
Check them in Troubleshooting:
- make sure they arent swopped (X switch activates the X indicator for example, not Y by mistake)
- Check that they...
Can't say its expected, do you maybe have another drive lying around to test with?
Well, not seeing the Error 31 windows port shutdown error anymore, so did make some difference
Upgrade: Windows on that tablet seems to be acting...
Yes, it has
Most likely: Warranty process - send you out a new one (if you have not used the warranty yet)
Lovely confirmation for those who don't want to put in the elbow grease to find where their VFDs are pushing the EMI into :)
Glad you got it sorted!
thats a 7.5m cable? Yikes, use a 1.2-1.5m standard cable please!
Indicates windows shut down the port.
Any cable extenders, USB hubs, nonstandard length cables etc between the PC and the BB?
@Logan Blankenship CONTROL V1.0.288 or later includes MacOS support for Interface Firmware updates - expecting it to be out today or tomorrow,...
Manufacturing tolerances, assembly differences, differences in leadscrew tensions etc. Calibration is a standard step of bringing any machine...
OpenBuilds CONTROL > Wizards and Tools > Calibration.
Try again after a reboot. Websocket timed out because PC was bogged down.
Flashing = normal. Software just asking controller where it is, and in...
Based on how rigid a platform? Tormach or a hobby grade machine with belt drives?