Separate names with a comma.
Some features disabled for guests. Register Today.
Oh, great, thanks again Peter!!
Thanks Peter, I just figured that single Z probe whas proprietary to OBs and that is why it didn't save. I noticed it didn't have a save button as...
I played around with the universal x,y,z, probe settings. I was using the OB's probe and it always reverts back to the 20mm. I found the settings...
Hey Peter, I only have the Z probe. I have to set it when I start OBC and if I close out the whole program and then restart it reverts back to the...
Oh, cool, thanks Peter!
Has there been any development in being able to save Z Probe thicknesses?? Open Builds default is 20mm and my probe is 19.2mm. While OBC is open...
Hey Peter, I got the board and installed it and everything is rainbows again. Thanks to your patience and Open Builds great customer service! I...
Thanks Peter, I think everything works fine just the Blackbox not energizing the motors. I did a new fresh install on another laptop and I am...
Without taking off the lid I can see the leds inside the box are lit up.
I need to remove the top of the box?
I jog x, then y, then z and I get [ATTACH]
clear the alarm and get [ATTACH]
When I home I get [ATTACH]
Nope, but be aware to turn on the spindle (if its wired as per docs.openbuilds.com) you need to send M3S1000 (not just M3) The Bosch router turns...
So here is what I did over the weekend, I tested the power supply, all good, I hooked up different usb cables, no change, changed laptops, ran...
Firmware Properties says I have a variable spindle, I have a Bosch router, is this an issue?? [ATTACH]
$4=1 and $1=255 seem to be correct. There is power as the black box fan is spinning and leds are on, as I said before the usb led is flickering red.
Thanks again Peter, in the control window the GRBL runs and the numbers do their thing but as you said I don't think the motors are energized!
As well when I said the limit switch alarmed, once I connected through the OB control the alarm goes on and I have to unlock it. Once unlocked I...
thanks Peter, when I plug in the usb cable usually the black box clunks or the motors clunk when they are locked by the black box. When I plug in...
