Separate names with a comma.
Some features disabled for guests. Register Today.
Thanks Peter! I'm going to have to give this a try. I've been using Grbl Panel for a while, but its missing that feature. Appreciate it!
Hey guys, Does the Open Builds Control Software allow you to jog the machine by just holding down an error key and then stop when you let up on...
NICE!!!!
Thanks guys, I have downloaded and played with K40 Wisperer, I can't really test it out until I get the Laser. Scheduled delivery is next...
I've done a thing... I currently have an Acro system running with an xpro V3. it engraves very well running on the Lightburn software which...
[ATTACH] I’d like to add a cover over my laser with an exhaust/fume extractor. But I don’t have an easy way to vent it outside. What I’d like...
[ATTACH] [ATTACH] [ATTACH] So I got the mount replaced and the new router is up and running. I had a SuperPID on the Dewalt before, but now since...
Thanks but the button repeat problem is what I’m trying to avoid...
I've got a question regarding Manual Jogging Movements. In Grbl panel, you set the incremental distance you want to move and the speed at which...
Got some good news, I ended going with a cheaper mount for the 1617 from eBay. Its a 3 piece design, but seems to do the job! Now I have to...
Be aware, you will get some galvanic corrosion from the steel screws that tap into aluminum. From my experience, the screws that hold the end...
So tonight I stopped by a store and picked up a 1617. It is larger and heavier! I placed it on top of my old dewalt 611 that is still in the z...
I guess I will find out.... I’ve built a large C-beam machine style machine. It has the larger belt drive. Nema 23 z axis motor. With the XL...
Thanks! There are three reasons I’m looking at the Bosch, 1. 2.25 HP, Needed for cutting aluminum 2. It accepts multiple collet sizes...
After many years of excellent performance, my dealt 611 router finally gave out. So I am currently looking for a new router. I’m looking at...
[ATTACH] Finally got done with the new controller box. Still looks messy to me. Not sure how I even fit all of that in that small box to begin...
No, not really The heat sink is actually an old CPU heatsink from a computer. You can't see the vanes, but they run vertical so air should get...
Small picture update. I decided to add a fused distribution block to the system so I had to move a few things around. I've still got quite a bit...
So I was able to finally figure it out. I needed to enable the invert pin. INVERT_SPINDLE_ENABLE_PIN Now it works!
I am trying to hook up my SuperPID to an Arduino Uno running GRBL V1.1. The problem I'm having is how to hook up the "Run" connection on the...
