Welcome to Our Community

Some features disabled for guests. Register Today.

Beginner Sliding Laptop Shelf For Openbuilds Table

Rating:
5/5,
Tags:
  • Machine Type:
    OpenBuilds LEAD Machine
    Materials:
    1/2" MDF, V-slot, gantry kit plate, 3d printed mounts.
    I built a 1510 table for my LEAD machine and wanted both an additional support beam for the table top and a pull out platform for my workshop computer. Two V-slot gantry plate kits and a 3d printed shelf mount provide a stable sliding system. The 3d printed mounts press onto the edges of the gantry plate (printed from PLA+ with 3 shells and 50% infill) and screws into the sides of the 1/2" thick MDF shelf hold it all together.

    To roll the shelf you will need:
    (2) V-Slot Gantry Kit - 20mm

    To add an additional support to a 1510 table you will need:

    (1) 20x60 V-Slot at 1680mm length (color of your table)
    (4) 60mm Inside-out brackets
    (28) M5 x 8mm Screws (these are in 10 packs on the store)
    (4) Single L brackets
    (4) MDF Screws
    shelf1.jpg shelf2.jpg shelf3.jpg

Attached Files:

Share this Project

Evilspawn, Giarc, Sun Tzu and 3 others like this.

User Comments

To post comments and download files, simply sign up and become a member!
  1. Mark Carew
    Thanks for sharing!
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice