Welcome to Our Community

Some features disabled for guests. Register Today.

Beginner " P " Cnc Clamps

  • Machine Type:
    CNC Router
    Illustrator / LaserWeb4
    Machine Time:
    12 min
    Bit or Laser Size:
    1/8" / 3.175mm mill end downcut
    Feeds & Speeds:
    1/2" Plywood
    1/4" screws
    1/4" TNUT

    Im working on a new project and it only make sense to get a new set of clamps. Now i usually clamp from the top or with double sided tape but there are a couple of projects down the road that will need some side pressure, thus the P Clamps.


    So this is what you need to do:
    - Place your stock material and secure it - I used double sided tape
    - Load the included LaserWeb4 Workspace
    Screen Shot 2017-12-02 at 8.51.21 PM.png
    or load the also included svg to your preferred CAM software
    - Clean up if needed and add some color to it !!!! :)
    20171202_201657.jpg Screen Shot 2017-12-02 at 8.51.21 PM.png 20171203_113246.jpg

Attached Files:

Share this Project

Camvec, ZacharyB, Ted Moyer and 4 others like this.

User Comments

To post comments and download files, simply sign up and become a member!