Welcome to Our Community

Some features disabled for guests. Register Today.

Mushroom Man

Rating:
5/5,
  • Machine Type:
    OpenBuilds LEAD Machine
    Software:
    Vectric V-carve Pro, bCNC, Meshmixer
    Electronics:
    xPRO Board
    Machine Time:
    6 hours.
    Bit or Laser Size:
    1/4" downcut EM, 1mm tapered balnose.
    Feeds & Speeds:
    100 IPM
    Materials:
    Cherry wood, Minwax PolyShades finish.
    I made this one from a leftover piece of thick cherry wood I had saved. It's kinda small compared to most other carvings I've done in the past, but I like it. The wood was almost 2" inches thick, so I was maxing out the bits I have. This particular model is just a piece of another model. I didn't realize that until I seen the full model on the web somewhere. Oh well, I carved it out as is. Here is the file link in case someone wants to give it a shot.
    STL Model for CNC Router Engraver Carving Machine Relief Artcam Aspire Cut3D "Mushroom man" CNC files
    And a link for the full model here: 2 3D STL Models Fungus Tree Forest Decorative Panels for CNC Router Carving Machine Printer Relief Artcam aspire Cut3D

    IMG_20190810_141405686.jpg

    IMG_20190810_141411564.jpg


    IMG_20190810_162106462.jpg


    IMG_20190810_162111432.jpg


    IMG_20190810_173234885.jpg

    IMG_20190810_173323930.jpg

    IMG_20190810_192317788.jpg


    IMG_20190810_192332133_HDR.jpg


    Carvings, whether they are 30" x 50" or 5" tall are all still very fascinating to me. They basically all start the same way, with a slab of wood. It's like a mysterious box just sitting there, you never know what's inside until you open it up.


    Hope you all like it.
    IMG_20190810_141405686.jpg IMG_20190810_141411564.jpg IMG_20190810_162106462.jpg IMG_20190810_162111432.jpg IMG_20190810_162115690.jpg IMG_20190810_173234885.jpg IMG_20190810_173258620.jpg IMG_20190810_173304894.jpg IMG_20190810_173307451.jpg IMG_20190810_173323930.jpg IMG_20190810_173326258.jpg IMG_20190810_192240754.jpg IMG_20190810_192317788.jpg IMG_20190810_192332133_HDR.jpg

Share this Project

Paul Stoller, ijv, rokasni and 4 others like this.

User Comments

To post comments and download files, simply sign up and become a member!
  1. tazer58
    Jack,

    If you don't mind could you send me a link on where you got the 3d carving file for that. Really like that one and would like to attempt to carve it out myself
      Jack D likes this.
    1. Jack D
      I'll try to find the link, but I most likely got it from Etsy.
      Jack D, Sep 27, 2019
    2. Jack D
  2. Mark Carew
    Jack you have mastered the art of 3D CNC carving! Again amazing work brother thank you for sharing :thumbsup::thumbsup::thumbsup:
      Jack D likes this.
    1. Jack D
      Thanks Mark. Still much to learn, but I'm getting there! ;-)
      Jack D, Sep 24, 2019
      Mark Carew likes this.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice