Welcome to Our Community

Some features disabled for guests. Register Today.

Beginner Opensource Logo Led Lamp

Rating:
5/5,
  • Machine Type:
    OpenBuilds LEAD Machine
    Software:
    Inkscape, Fusion 360, Openbuilds Control
    Electronics:
    xPRO Board
    Machine Time:
    ca. 20 min
    Bit or Laser Size:
    3.175mm
    Feeds & Speeds:
    1800 mm/min
    Materials:
    MDF
    Another fast project using the LEAD 1010 CNC milling machine.
    This time in a few minutes we created a LED wall lamp. - this is a prototype version.
    We used MDF, strip LED and power supply for this purpose.

    V-SLOT-POLAND-LED-LAMP.jpg
    To make a design, just a piece of MDF (~ 700mm x 290 mm x 10 mm) or 3 smaller pieces, e.g. 3 x 300x300 mm
    Work in MDF is fast and with a low-class cutter you can work at speeds over 1800mm / min.
    As it is a prototype, we have opened additional holes, e.g. for the power supply. In our first model, we used a simple cheap plug-in power supply.
    The amount of LED strip with a power of 9.6W / m is about 2m (exactly not measured).
    LED strip for 12V security.
    Power supply power approx. 2.5A (30W).
    MDF black paint / spray.
    MDF elements are screwed together with LOW PROFILE 25mm screws.

    V-SLOT-POLAND-LED-LAMP1.jpg V-SLOT-POLAND-LED-LAMP2.jpg
    V-SLOT-POLAND-LED-LAMP3.jpg V-SLOT-POLAND-LED-LAMP4.jpg
    V-SLOT-POLAND-LED-LAMP6.jpg

    V-SLOT-POLAND-LED-LAMP.jpg V-SLOT-POLAND-LED-LAMP1.jpg V-SLOT-POLAND-LED-LAMP2.jpg V-SLOT-POLAND-LED-LAMP3.jpg V-SLOT-POLAND-LED-LAMP4.jpg V-SLOT-POLAND-LED-LAMP5.jpg V-SLOT-POLAND-LED-LAMP6.jpg V-SLOT-POLAND-LED-LAMP7.jpg

Attached Files:

Share this Project

MFCarew, MaryD, Mark Carew and 2 others like this.

User Comments

To post comments and download files, simply sign up and become a member!
  1. Theresa
    Very cool
  2. Mark Carew
    Great project @damian_Poland I need one of these on my wall! Thank you for the share and the tutorial :thumbsup:
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice