Welcome to Our Community

Some features disabled for guests. Register Today.

Beginner Catan Board Game Pieces

Rating:
5/5,
Tags:
  • Machine Type:
    Other Machine
    Software:
    Vcarve Pro
    Electronics:
    OpenBuilds BlackBox
    Machine Time:
    Hours - I don't know the actual amount because of the learning curve.
    Bit or Laser Size:
    1/8" end mill and engraving bit
    Feeds & Speeds:
    20000 rpm (as slow as my router goes) Feeds were about 30mm/minute
    Materials:
    3mm baltic birch plywood
    Catan game board pieces. Basic game plus some expansions. Making it for a friend. This was a great project for learning the software and the CNC process. All the files are uploaded as .DXF. The only thing I didnt' do on the CNC was engrave the chits or ports. I used my laser engraver after cutting out the shapes on the CNC. Feel free to modify them.

    Machine is a Bootech DIY plywood CNC, Ridgid trim router. Catan Game Board Pieces.JPG
    Catan Game Board Pieces.JPG

Attached Files:

Share this Project

alandopp, Elaine M, btrk_lx and 5 others like this.

User Comments

To post comments and download files, simply sign up and become a member!
  1. Mark Carew
    Nice job!
    1. Dale Stewart
      Thanks!
      Dale Stewart, Apr 22, 2021
      Mark Carew likes this.
  2. Doemer
    Where can I download the files for this? Thanks
      Appahman and btrk_lx like this.
    1. Elaine M
      Did you ever find out where to download it?
      Elaine M, Oct 19, 2022
    2. Dale Stewart
      I can provide them. Sorry about the delay in responding. Missed your comment. What format do you want them in? I created them in VCarve Pro.
      Dale Stewart, Dec 29, 2022
    3. Dale Stewart
      Uploaded DXF files.
      Dale Stewart, Dec 29, 2022
  3. Dan_WoodWorker
    Where can I obtain the files?
    1. Dale Stewart
      I can provide them. Sorry about the delay in responding. Missed your comment. What format do you want them in? I created them in VCarve Pro.
      Dale Stewart, Dec 29, 2022
    2. Dale Stewart
      Uploaded DXF files.
      Dale Stewart, Dec 29, 2022
  4. Fefe
    Mastermind project. But how can i download these files ?
    1. Dale Stewart
      Uploaded DXF files.
      Dale Stewart, Dec 29, 2022
  5. Dale Stewart
    For anyone interested, I have uploaded the DXF files for the various pieces. This was all done in VCarve Pro if it helps anyone.
      Mark Carew likes this.
    1. Mark Carew
      Thank you!
      Mark Carew, Dec 29, 2022
  6. Dale Stewart
    Here is the finished board painted by my friend.

    Images

    1. 17C939FF-5D2F-45B5-9CA4-12E03E8F31E7.jpeg
  7. Evilspawn
    I love this! I might be making something like this soon :)
    Is 30mm/min correct? That seems incredibly slow to me.
    1. Dale Stewart
      If I cut them out with the 12 watt laser, I’m at 100mm/minute, 95% power. With the router, Openbuilds control shows about 800mm/minute on the straight line cuts.
      Dale Stewart, Oct 9, 2023
      Evilspawn likes this.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice