Welcome to Our Community

Some features disabled for guests. Register Today.

OX AI

Discussion in 'CNC Mills/Routers' started by Robert Hummel, Feb 3, 2014.

  1. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    I think it has more to do with the placement of bolt holes more then anything else.
    A higher placement does mean more teeth come in contact with the belt
     
    Balu likes this.
  2. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    Well that's it for the kit parts, one sold four left.
    On to the 4 plate sets while I clean these up :)
    The fun part :confused:
    image.jpg
     
    Nick W likes this.
  3. Boyd

    Boyd New
    Builder

    Joined:
    Jun 14, 2014
    Messages:
    2
    Likes Received:
    0
    PM'd you
     
  4. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    ;)
     
  5. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    Update!
    Down ta two kits folks :oops:
    May try to squeeze one more out of the stock I have left
    4 plate orders first ;)

    Ty for the patient waiting I'm sure you will be pleased :D
     
  6. R_AB

    R_AB New
    Builder

    Joined:
    Oct 26, 2014
    Messages:
    5
    Likes Received:
    1
    PM for you ;)
     
  7. thommy

    thommy New
    Builder

    Joined:
    Nov 7, 2014
    Messages:
    16
    Likes Received:
    0
  8. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    Update!
    All kits have sold, since they sold so fast I will be making 2 more while working on finalizing my own build :)
     
    Nick W and DiggerJ like this.
  9. DiggerJ

    DiggerJ Journeyman
    Builder

    Joined:
    Sep 2, 2014
    Messages:
    412
    Likes Received:
    109
    Nice work Robert!
     
    Robert Hummel likes this.
  10. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    Ty, how's your build coming along?
     
  11. DiggerJ

    DiggerJ Journeyman
    Builder

    Joined:
    Sep 2, 2014
    Messages:
    412
    Likes Received:
    109
    Started a new job, and decided to move "Babe" and "the Panther" into the basement for the winter. Leg kit for the table should be here by the weekend, and new lights are up in the basement.

    Been working on a group deal for the screws/nuts for the Lautr3k. Got that deal put together and bought several spools of filament from FoxSmart. Hopefully back to the builds this weekend.
     
    Robert Hummel likes this.
  12. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    Turns out I had enough for 3 more kits :D
    Cleaning and packing them up now, they should be ready to ship by weeks end
    image.jpg
     
    Nick W and Jestah like this.
  13. Nick W

    Nick W Well-Known
    Builder

    Joined:
    Oct 22, 2014
    Messages:
    99
    Likes Received:
    61
    One day I will convince the wife that it is a good thing for me to have a CNC Router and will have one of your kits. They look top notch. Maybe I should just start buying bits and pieces before she realizes what is happening.
     
  14. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    Lol thanks for the comments :)
    Your plan may in the end just get ya in more trouble then ya would have pulling the oh I got that a long time ago move as they always do ;)
     
  15. slittle

    slittle New
    Builder

    Joined:
    Oct 31, 2014
    Messages:
    33
    Likes Received:
    6
    The usps or ups delivery always bust my plans like that. My defense is well its paid for and not on the credit card so live with it. I still catch the evil eye tho lol
     
    Nick W likes this.
  16. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    Kits are well on track and should be ready for shipping soon :thumbsup:
    image.jpg two have sold so there will only be two up for grabs at the end of the week.
    Then it's 4 plate sets for a bit till my OX is complete
    Ty again to all for waiting and welcome to the OX club to those who have received your kits.
    I hope they are everything you expected :D
     
  17. Tweakie

    Tweakie OpenBuilds Team
    Moderator

    Joined:
    Jan 18, 2014
    Messages:
    784
    Likes Received:
    326
    Hi Nick,

    Usually a deal can be reached with the wife re; new shoes, handbags etc. which are offset against CNC parts. ;)

    Tweakie.
     
    Jestah, Nick W and Robert Hummel like this.
  18. R_AB

    R_AB New
    Builder

    Joined:
    Oct 26, 2014
    Messages:
    5
    Likes Received:
    1
    Hi Robert,

    Well my set arrived yesterday, most impressed, some awesome workmanship in that little box, and as commented by others, packaging must have taken a while, it's spot on.

    What I'm not so impressed with are my powers of deduction, which seem to have escaped me, I can't figure out what the bag with the four plastic clips are for, can you enlighten me? Anyhow, just waiting on my openbuilds order to arrive (Stopped by customs for extra charges :cry:) then it's on with the build.

    I may have bitten off more than I can chew, going for a Spindle/3D Printer/Laser combo (after seeing the awesome work done at http://hobbycncart.com/forum/63-151-8, check it out).

    Also check out which I think is one of the coolest things.

    Wish me luck.
     
    Robert Hummel likes this.
  19. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    Lol Ty for the kind words, I don't like to send out anything that I wouldn't be happy with receiving myself and I try to pack them well due to the horrifying way most post handle their packages.
    I have added the little clips as a extra in the kit to aid in routing your wires, here is a pic of how I use them in my builds :)
    image.jpg
    They have an M5 hole in the centre and attach with a M5 8mm screw/t-nut.
    Perfect for tie strapping loose or stray wires ;)
     
    R_AB likes this.
  20. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    P.S
    That is completely possible for you and I believe Digger is on the same path ;)
    I built and sent him a TTL laser driver board "same circuit as laser v build" that will turn on and off his laser with a simple 5 volt logic signal.
    let me know if you require any help
    A good read through the laser v build would guide you well enough I think :)
     
  21. R_AB

    R_AB New
    Builder

    Joined:
    Oct 26, 2014
    Messages:
    5
    Likes Received:
    1
    Thanks Robert, that is very cool, I had been thinking of ways to deal with the no doubt ridiculous amount of wiring, and this will be a great help in keeping things neat.

    I have indeed read the Laser V thread several times through, that is what inspired me initially to look into the lasers and come across the build I linked to above, so thanks for that also, I am sure I will require a great deal of help and will be sure to hassle you constantly (only kidding :D)

    Digger, interesting that you are following the same path, I'll be sure to let you know of anything that I come across that may be of help (like the thread I referenced above, which you probably already found long ago)

    Some other interesting/useful links:
    http://www.picengrave.com/Pic Programs Page/PDF Files/misc/Laser Setups.pdf
    http://www.instructables.com/id/Shapeoko-2-Arduino-UNO-R3-grbl-9g-8bit-Raster-Phot/

    Apologies, they are slightly off topic, back to the OX AI :)
     
  22. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    It has bin confirmed the the Z axis spacer block "mounting holes on the X plate only " need to be drilled with a 13/64 bit taking them from 5mm to 5.1mm
    This is something that I used to do to clean up the holes to make them true circles and why I never had complaints , I increased the poly count in sketchup thinking this would clear the need for post drilling but has caused the compatibility with OB spacer blocks to arise.
    So a good thing and bad has come of it, thank god it's a simple fix folks.
    I will be correcting the file as soon as my spacer blocks show, about 2 days out ;)
     
  23. WhiskeyMike

    Builder

    Joined:
    Nov 21, 2014
    Messages:
    1
    Likes Received:
    0
    Can you send me a price for the entire kit sent to 78612(Texas). Also, is there a someplace that lists everything that is provided and what else is required that is not in the kit?
     
  24. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    What's included with the kit

    Custom Four main plate set with belt clips
    Custom end plates with belt clips
    1/4" universal Z plates Top/Bottom "nema 17/23"
    Name plate/brace
    6061 motor spacers for X&Y
    2 x 608z bearings for OB T8 rod support
    4 x 70mm M5 bolts for X axis
    M3 hardware kit for belt clips
    4 x M5 Wire ties tabs
    Z axis spacer blocks "free till compatablty with OB blocks are fixed"

    The rest of the I teams can be found in the BOM of the original OX
     
  25. João Fernandes

    Builder

    Joined:
    Oct 27, 2014
    Messages:
    6
    Likes Received:
    0
    Hello Robert.

    The file you are talking about is the "OX AI.zip" that's on the "File Tab"?
    If so, is there any way to see when that file is updated?

    Thanks :)
     
  26. daniel lopez hernandez

    Builder

    Joined:
    Nov 10, 2014
    Messages:
    2
    Likes Received:
    0
    Hi robert !!! Could you send to my email ( [email protected] ) the cost of the 4 plates.

    The shipping goes to 5418 NW 79th Ave Doral, Fl 33166
     
  27. Custom Builder

    Builder

    Joined:
    Nov 29, 2014
    Messages:
    5
    Likes Received:
    4
    This is Robert Hummel

    My account is no longer working on the OB forum, I have done all I can from my side but it seems my log in info has bin removed :eek:

    For anyone who has ordered kits you will be happy to know your orders are on their way :thumbsup:

    Outstanding payments that need to clear, the kits will ship as soon as I get confirmation of payment.

    For any other contact with me feel free to PM this account ;)
     
  28. GrayUK

    GrayUK Openbuilds Team Elder
    Staff Member Moderator Builder

    Joined:
    May 5, 2014
    Messages:
    1,668
    Likes Received:
    627
    This Graham Sinclair

    You must have been sold to the highest bidder! :D

    We only offered £5, cause that is all we could get for you! :rolleyes:

    Come on Mark, let the poor guy back in.
    I'm sure he'll behave himself in the future! :thumbsup::thumbsup:

    Gray
     
    Custom Builder likes this.
  29. Custom Builder

    Builder

    Joined:
    Nov 29, 2014
    Messages:
    5
    Likes Received:
    4
    I have two four plate sets that simply require a light sanding to clean up the scuffs from scotch pads.

    This is a chance for someone to save some cash

    I will pack them up and post when ready to ship.

    One kit is also being finished and then will be posted

    After that no more plate service over OB, sorry the greedy have ruined that big time.

    Mark bud, I feel for you and apologize if this matter was a result of shady competition, think someone is a little upset
     
  30. Robert Hummel

    Robert Hummel Custom Builder
    Moderator

    Joined:
    Nov 14, 2013
    Messages:
    978
    Likes Received:
    715
    I have my account back, thank you bud! @kram242
    I have some choice words I will keep to myself about the scum messing with OB
     
    DiggerJ likes this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice