Welcome to Our Community

Some features disabled for guests. Register Today.

help on water pump 2.2kw spindle

Discussion in 'General Talk' started by gibson, Aug 8, 2019.

  1. gibson

    gibson Well-Known
    Builder

    Joined:
    Jul 5, 2015
    Messages:
    185
    Likes Received:
    32
    will a 110 v cnc water pump work for my 2.2 kw spindle i have the 220v they sent me in kit i dont have a nother 220v outlet any help...
     
  2. Kevon Ritter

    Kevon Ritter Veteran
    Builder

    Joined:
    Apr 30, 2015
    Messages:
    597
    Likes Received:
    293
    Yes.

    If you wired your own electrical box, you can just tap the two hots and use the pump that you have. Either way, you should be running it with a switch or relay to make life easy.
     
    Joe Santarsiero likes this.
  3. gibson

    gibson Well-Known
    Builder

    Joined:
    Jul 5, 2015
    Messages:
    185
    Likes Received:
    32
    hum is there a video on this ....
     
  4. Kevon Ritter

    Kevon Ritter Veteran
    Builder

    Joined:
    Apr 30, 2015
    Messages:
    597
    Likes Received:
    293
    I don't know if this is technically up to code, but I know there aren't any issues. With that said, only use it as reference.

    I made a giant extension cord. One end has a 4 prong dryer plug. The other end has my custom box that features both 240V and 120V. NOTICE HOW I USED DIFFERENT PLUG TYPES!!! It needs some refinement. Everything needs to be sealed for safety reasons.

    KRE Mill V3 57.png
    [​IMG]
     
    sharmstr and Joe Santarsiero like this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice