Welcome to Our Community

Some features disabled for guests. Register Today.

Newbie needing help with bits

Discussion in 'CNC Mills/Routers' started by Gina Botfield, Jun 18, 2019.

  1. Gina Botfield

    Builder

    Joined:
    Jun 1, 2019
    Messages:
    48
    Likes Received:
    2
    Hi,
    I have now got my machine (Workbee 750 x 750 belt) all set up, spoiler board on, using a Dewalt router with a 1/4 in collet. Which bits would you recommend? I am only carving names and some pocketing to start with nothing more complicated than that. I have been told some places but there are so many out there and the prices vary from place to place. Would like some links if possible and would like to have soon so china out of the question for now.
    Thanks Gina :)
     
  2. RV6APilot

    RV6APilot Well-Known
    Builder

    Joined:
    Apr 23, 2019
    Messages:
    29
    Likes Received:
    23
    I bought a set of bits from Harbor Freight for $66 after my coupon. Amazon is another place to buy bits with several V bits and end mills as part of the Prime program, some with next day delivery. That is where I have purchased my V bits and surfacing bit.
     
  3. Alex Chambers

    Alex Chambers Master
    Moderator Builder

    Joined:
    Nov 1, 2018
    Messages:
    2,679
    Likes Received:
    1,321
    For experimenting with I strongly recommend the cheap router bits sold by toolstation. If you haven't got a local branch they deliver free for orders over £10. Search toolstation.com
    Alex.
     
    Gina Botfield likes this.
  4. Gina Botfield

    Builder

    Joined:
    Jun 1, 2019
    Messages:
    48
    Likes Received:
    2
    Thank you, I should have mentioned I am in the UK :)
     
  5. RV6APilot

    RV6APilot Well-Known
    Builder

    Joined:
    Apr 23, 2019
    Messages:
    29
    Likes Received:
    23
    OOPS!!! Sorry about that. Not sure how Amazon works there but you can take @Alex Chambers advice and use Toolstation.
     
  6. Alex Chambers

    Alex Chambers Master
    Moderator Builder

    Joined:
    Nov 1, 2018
    Messages:
    2,679
    Likes Received:
    1,321
    Look at the Silverline range - they are cheap but reasonable quality and it's not too upsetting if/when you break one - wear eye protection. I use the 3mm and 6mm (1/4" shank) a lot for basic pockets and 2D profiles (cutting out).
    They don't seem to do a V bit though which you might want for lettering.
    Alex.
     
  7. Gina Botfield

    Builder

    Joined:
    Jun 1, 2019
    Messages:
    48
    Likes Received:
    2
    Thanks I have ordered some from Toolstation, should be here tomorrow :) Gina
     
  8. GrayUK

    GrayUK Openbuilds Team Elder
    Staff Member Moderator Builder

    Joined:
    May 5, 2014
    Messages:
    1,668
    Likes Received:
    627
    If you are not in a great rush, treat yourself to a mixed load of cheap Chinese bits. They lose their edge true, but not until they have paid for themselves many times. Plus you can use these to establish, what sizes and types you are going to need more frequently, and therefore order the better bits with some first-hand knowledge of what you need.
     
  9. Colin Mccourt

    Colin Mccourt Journeyman
    Builder

    Joined:
    Jan 23, 2019
    Messages:
    354
    Likes Received:
    184
    em2.jpg
    Second that El Cheapo's to practice with
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice