Welcome to Our Community

Some features disabled for guests. Register Today.

Design Question

Discussion in 'General Talk' started by selkov, Feb 28, 2019.

  1. selkov

    selkov New
    Builder

    Joined:
    Dec 3, 2014
    Messages:
    34
    Likes Received:
    0
    So much info on this web yet some basic's I can not find. IE, I am planning a build using c-frame and I will be using the 90 degree plates to join vertical uprights. So I need screws [m5] and tee nuts [m5] but I can not find the thickness of the plate or the well depth for the c-beam so what length screw do I need?
     
  2. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,030
    Likes Received:
    1,428
    The thickness of the plate (4mm) is located on the product page. The depth of the c-beam well is 6.1mm
     
  3. selkov

    selkov New
    Builder

    Joined:
    Dec 3, 2014
    Messages:
    34
    Likes Received:
    0
    I see I wrote 90 degree plate, I was looking actually lookin at the t joining plate, no dimension is given there. I assume there the same though.
    Thanks for the well depth.
     
  4. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,030
    Likes Received:
    1,428
    The t joining plate has the thickness listed on the page as well T Joining Plate
     
  5. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,030
    Likes Received:
    1,428
    It also says in the description to use 10mm screws. :)

    Mounts easily with 10mm Low Profile M5 Screw (sold separately)
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice