Welcome to Our Community

Some features disabled for guests. Register Today.

OpenBuilds LEAD Machine 1010 40" x 40"

Discussion in 'CNC Mills/Routers' started by Natesbox, Dec 29, 2018.

  1. Natesbox

    Natesbox New
    Builder

    Joined:
    Dec 26, 2014
    Messages:
    10
    Likes Received:
    10
  2. jamin35008

    jamin35008 Well-Known
    Builder

    Joined:
    Feb 7, 2019
    Messages:
    136
    Likes Received:
    44
    Hey Natesbox. Awesome Vlog! Thank you. I'm very interested in getting a cnc myself and the LEAD 1010 is at the top of my list right now. I don't have any cnc experience either so I'm glad you look to be doing really well so far! How long was the build? What software are you using if you don't mind me asking?
     
  3. Natesbox

    Natesbox New
    Builder

    Joined:
    Dec 26, 2014
    Messages:
    10
    Likes Received:
    10
    The build took me a solid weekend and a few nights during the week. I did a lot of studying ahead of time and consider myself fairly adept at assembling electronics/mechanical stuff. There’s a lot to learn but the effort is not without reward.

    In terms of software, I started with the openbuilds software and have since moved in to bCNC for the machine control. The openbuilds stufff works and is constantly being updated which is nice. If you want to tinker, then you can look into alternatives, but it will definitely get the job done.

    On the cam side you may want to go with something commercial if cut times and toolpath optimization matter to you.
     
    jamin35008 likes this.
  4. jamin35008

    jamin35008 Well-Known
    Builder

    Joined:
    Feb 7, 2019
    Messages:
    136
    Likes Received:
    44
    I don't have a machine yet but I have downloaded the Vcarve Desktop trial and have been trying the Openbuilds software for a month now hoping to have some sort of idea of what I'm doing before I get the cnc. The assembly videos seem to be enough to get through the cnc and electronics builds....were they your main source of directions or does the kit come with a paper manual too?

    Thanks!
     
  5. Natesbox

    Natesbox New
    Builder

    Joined:
    Dec 26, 2014
    Messages:
    10
    Likes Received:
    10
    Nope I just used the videos which were great as long as you don’t mind pausing it as you work. No paper docs, these machines require the supercomputer between your ears to complete :)
     
  6. jamin35008

    jamin35008 Well-Known
    Builder

    Joined:
    Feb 7, 2019
    Messages:
    136
    Likes Received:
    44
    Men I can't wait to get started! Thanks for the info!
     
  7. Joshua Enos

    Builder

    Joined:
    Feb 27, 2019
    Messages:
    41
    Likes Received:
    18
    How long will it take for the pre orders to start shipping?for the lead system 1010? Will it be like certain waves of before orders or just how they say it will he released on the 28 February.
     
    Robert Eaton likes this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice