Welcome to Our Community

Some features disabled for guests. Register Today.

CNC Coating Machine

Discussion in 'Other Builds' started by Vegard Humlen, Dec 1, 2018.

  1. Vegard Humlen

    Builder

    Joined:
    Jan 30, 2018
    Messages:
    3
    Likes Received:
    4
    Vegard Humlen published a new build:

    Read more about this build...
     
  2. dregalia

    dregalia New
    Builder

    Joined:
    Jan 17, 2017
    Messages:
    10
    Likes Received:
    13
    Would you go into detail about how you have created the pump/liquid distribution system?
     
  3. fernando palacio edreira

    Builder

    Joined:
    Mar 3, 2017
    Messages:
    6
    Likes Received:
    0
    great job!!!!!!, im thinking about creating any similar but at the moment didnt know nobody that works with vmatic....culd you tell us any:(:(:(:(thing more about the project????

    tks a lot friend

    Fdo
     
  4. Vegard Humlen

    Builder

    Joined:
    Jan 30, 2018
    Messages:
    3
    Likes Received:
    4
    Hello, sorry about the late reply. I have been offline for a while.
    I have two pressure tanks with two parts of liquid. With air pressure the liquids are pumped up to the valve where the ratio of each part is calibrated. From there both parts go in to the static mixer. The Valve comes with a controller who open and close the valve with air pressure. I can record a short video next week and upload it when it is runing. If you want I can relay you to my contact in Vmatic. I gave them technical data of my fluid and the sorted out all the parts needed.
     
  5. Vegard Humlen

    Builder

    Joined:
    Jan 30, 2018
    Messages:
    3
    Likes Received:
    4
    Hello, sorry about the late reply. I have been offline for a while.
    I have two pressure tanks with two parts of liquid. With air pressure the liquids are pumped up to the valve where the ratio of each part is calibrated. From there both parts go in to the static mixer. The Valve comes with a controller who open and close the valve with air pressure. I can record a short video next week and upload it when it is runing. If you want I can relay you to my contact in Vmatic. I gave them technical data of my fluid and the sorted out all the parts needed.

    What kind of fluid are you planning to use? I will soon build one more with higher viscosity one part fluid. More or less a glue dispenserfront.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice