Welcome to Our Community

Some features disabled for guests. Register Today.

CNC xPRO V4

Discussion in 'Other Builds' started by Spark Concepts, Dec 11, 2018.

  1. Spark Concepts

    Spark Concepts Journeyman
    Builder

    Joined:
    Dec 17, 2013
    Messages:
    131
    Likes Received:
    107
    GrayUK likes this.
  2. arcrunner

    arcrunner Well-Known
    Builder

    Joined:
    Jul 19, 2018
    Messages:
    48
    Likes Received:
    37
    Looks beefier, I like the replaceable fuses!
     
  3. Rob Mitchell

    Rob Mitchell Well-Known
    Builder

    Joined:
    Nov 29, 2015
    Messages:
    105
    Likes Received:
    35
    @Michael Any advancements to the way acceleration is handled? I especially like the s-curve acceleration introduced by Syntheos in the tinyG board. Mainly for how it addresses acceleration and deceleration for beefier gantry during moves.
     
  4. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,030
    Likes Received:
    1,428
    Sorry for the dumb question, but what's the biggest motors I can use with this board? I have a Workbee 1510 that I'm converting to acme screws and want to upgrade my motors as well.

    Also, what is "Spindle Diretion"? :)
     
  5. arcrunner

    arcrunner Well-Known
    Builder

    Joined:
    Jul 19, 2018
    Messages:
    48
    Likes Received:
    37
    The standard nema 23 on the openbuilds partstore would be the biggest I would go, since these would underdrive those motors by a little bit.

    If you use a spindle (not a router like the dewalt) you can change the direction. I've used this function on a big cnc mill to turn the opposite direction when drilling holes, it helps to throw off material that builds up on the endmill.
     
  6. sharmstr

    sharmstr OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 23, 2018
    Messages:
    2,030
    Likes Received:
    1,428
    Thank you.

    btw - I was referring to "direction" being misspelled on the board.

    [​IMG]
     
  7. GrayUK

    GrayUK Openbuilds Team Elder
    Staff Member Moderator Builder

    Joined:
    May 5, 2014
    Messages:
    1,668
    Likes Received:
    627
    sharmstr: I think it was simply abbreviated so as to fit in the Artwork. :)
    arcrunner: I've not heard of, or considered the idea, of reversing the spin of a spindle to clear the swarf out. Interesting. :rolleyes:
     
    sharmstr likes this.
  8. arcrunner

    arcrunner Well-Known
    Builder

    Joined:
    Jul 19, 2018
    Messages:
    48
    Likes Received:
    37


    Jump to 2:10 for a look at how it works, kind of satisfying to be honest.
     
    sharmstr and GrayUK like this.
  9. Spark Concepts

    Spark Concepts Journeyman
    Builder

    Joined:
    Dec 17, 2013
    Messages:
    131
    Likes Received:
    107
    arcrunner: Much beefer, much easier to setup and get going too!

    Rob: GRBL is running a bang-bang acceleration management style while looking ahead for velocity changes. The S curve accelerations are typically done using brute force and may not always produce a converging solution resulting in loss of steps. Theres a write up of how GBRL manages acceleration here (gnea/grbl) with more info in the linked article - you know, if you need some light reading material ;).

    sharmstr: congratulations sir, you now hold the honor of generating the most creative swearing heard in southern Ohio... good catch and yes they went to production that way - proof we are engineers i suppose. Expect a prize soon. On to your actual question, the 2.8A drivers on OB are a good threshold for a max for the on board drivers. However, you can source higher torque motors with lower amps or there is the option to wire in external drivers. Our boards run many screw driven workbees.

    GrayUK: Excellent answer! It's all about the artwork lol!
     
    sharmstr likes this.
  10. arcrunner

    arcrunner Well-Known
    Builder

    Joined:
    Jul 19, 2018
    Messages:
    48
    Likes Received:
    37
    So these can still control external drivers? Sorry, I couldn't see where the pins or solder points were for external drivers.
     
  11. Spark Concepts

    Spark Concepts Journeyman
    Builder

    Joined:
    Dec 17, 2013
    Messages:
    131
    Likes Received:
    107
    I haven't gotten that part of the post up yet, but we broke all the signals out to screw terminals so no crimping or soldering. Also have a Motor Voltage output terminal too so you can run on board and externals easily from same supply (current limited by output blade fuse)*
    xProV4_Top_External_drivers.jpg
     
  12. Leirpytt

    Leirpytt New
    Builder

    Joined:
    Jun 24, 2017
    Messages:
    1
    Likes Received:
    0
    This is really good news! My V3 just gave up on me (basic idiotic user error). So, I'm in the marked for a new one. Ready to order a V4. @Michael, want to share anything more about when it's possible to order one?
     
  13. arcrunner

    arcrunner Well-Known
    Builder

    Joined:
    Jul 19, 2018
    Messages:
    48
    Likes Received:
    37
    looks like you can order them from the spark concepts website, release date is the 17th so not that far away
     
    Leirpytt likes this.
  14. Rob Mitchell

    Rob Mitchell Well-Known
    Builder

    Joined:
    Nov 29, 2015
    Messages:
    105
    Likes Received:
    35
    Decisions decisions

    Can’t decide between Spark Concepts Xpro V4 or the Openbuilds Blqckbox CNC. On paper they have similar specs.

    Thoughts?
     
  15. Gary Caruso

    Gary Caruso OpenBuilds Volunteer
    Staff Member Moderator Builder

    Joined:
    May 19, 2016
    Messages:
    1,184
    Likes Received:
    531
    Hi Rob,
    Depends on if you plan on using bigger nema23 motors or not, the xPro can do 1.75A (2.5A peak) per channel where as the BB can do 3.25A (4A peak).
    Cheers
    Gary
     
  16. Rob Mitchell

    Rob Mitchell Well-Known
    Builder

    Joined:
    Nov 29, 2015
    Messages:
    105
    Likes Received:
    35
    @Gary Caruso I can see that the BB will be somewhat more expensive than the Xpro given the extra AMP handling, the case and a few other differences. Do you know yet the price of the BB or at least a range?
     
  17. Gary Caruso

    Gary Caruso OpenBuilds Volunteer
    Staff Member Moderator Builder

    Joined:
    May 19, 2016
    Messages:
    1,184
    Likes Received:
    531
    I do not know, I will find out when everybody else does :)
     
  18. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,742
    Likes Received:
    2,407
    @Michael Props out to the Team at Spark Concepts for a great new CNC driver solution!
     
    Michael.M likes this.
  19. Steven Yampolsky

    Builder

    Joined:
    Sep 13, 2017
    Messages:
    23
    Likes Received:
    8
    Is it possible to post a drawing of the board with dimensions? Mostly interested in proper dimensions to model up a case.
     
  20. Spark Concepts

    Spark Concepts Journeyman
    Builder

    Joined:
    Dec 17, 2013
    Messages:
    131
    Likes Received:
    107
    Thanks Mark - couldn't do it without you guys!

    Steven, sure thing! .step and .sldasm (solidworks) models are now loaded in the file section. Let me know if you need or want something different
     
    Mark Carew and sharmstr like this.
  21. MaryD

    MaryD OpenBuilds Team

    Joined:
    Apr 13, 2016
    Messages:
    649
    Likes Received:
    639
    It's here! Well... HERE

    v4_xpro_arrived!.png
     
  22. Steven Yampolsky

    Builder

    Joined:
    Sep 13, 2017
    Messages:
    23
    Likes Received:
    8
    Sad statement but I don't have the 2018 solidworks. :-(
    Any chance to re-save the file in the 2017 or earlier format? Also, when openning .step i SW, i get invalid geometry statement.
     
  23. arcrunner

    arcrunner Well-Known
    Builder

    Joined:
    Jul 19, 2018
    Messages:
    48
    Likes Received:
    37
    Solidworks competing with Autodesk Fusion 360

    Hopefully this helps, basically you can get solidworks 2018-2019 educational edition for free right now.
     
    Steven Yampolsky likes this.
  24. Bob Waterfield

    Builder

    Joined:
    Jan 21, 2019
    Messages:
    21
    Likes Received:
    3
    Anyone know how many amps the 0-5 volt spindle speed can deliver?
     
  25. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    13,749
    Likes Received:
    4,070
    20mA - its a logic signal only. Cannot drive anything directly: you need a spindle/motor controller
     
  26. Spark Concepts

    Spark Concepts Journeyman
    Builder

    Joined:
    Dec 17, 2013
    Messages:
    131
    Likes Received:
    107
    Hi Bob/Peter, the spindle output will be limited to 100ma by a thernal fuse for both 0-5V and 0-10V settings. As Peter mentioned if driving a spindle you will need a spindle drive controller but for other projects you have up to 100ma to play with
     
  27. markdoll01

    Builder

    Joined:
    Jul 16, 2016
    Messages:
    21
    Likes Received:
    29
    Good Day,
    Anybody got the Xpro V4 and Bluelink (Bluetooth Cable Replacement LInk) working with ESTLcam ? Does not seem like ESTLcam likes the Bluelink :(
     
  28. Bob Waterfield

    Builder

    Joined:
    Jan 21, 2019
    Messages:
    21
    Likes Received:
    3
    Just to update, have it all working.
    The DC-DC converter the spindle speed output was controlling went bad. Replaced with a new DC buck and all works well.
    Thanks.
     
  29. Steven Yampolsky

    Builder

    Joined:
    Sep 13, 2017
    Messages:
    23
    Likes Received:
    8
    I'd like to report success upgrading my Acro Laser 511 to V4. After adjusting pots from max to about the middle, the NEMA 17 are running nice cool and I was able to successfully complete about 15-20 hours forth of laser cutting with ease. xPro V4 is one great product!
     
    GrayUK and sharmstr like this.
  30. markdoll01

    Builder

    Joined:
    Jul 16, 2016
    Messages:
    21
    Likes Received:
    29
    Just want to let know that I did contact Christian who is the creator of Estlcam and unfortunately is estlcam not compatible with the bluelink.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice