Welcome to Our Community

Some features disabled for guests. Register Today.

Cricut Expressions 2 to ESP32 GRBL Control

Discussion in 'Other Builds' started by MattR, Nov 18, 2018.

  1. MattR

    MattR New
    Builder

    Joined:
    Mar 5, 2016
    Messages:
    7
    Likes Received:
    15
    MattR published a new build:

    Read more about this build...
     
  2. Anthony Bolgar

    Anthony Bolgar Journeyman
    Builder

    Joined:
    Jan 14, 2016
    Messages:
    354
    Likes Received:
    198
    Well done!
     
  3. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,742
    Likes Received:
    2,407
    Great hack!
    You may want to take a look at the OpenBuilds CAM software and see if that helps with your drag knife. (attached a pic so you can see it in the menu)
    Thanks for the share and nice job brother :thumbsup:
    2018-11-19_6-47-52.jpg
     
  4. MaryD

    MaryD OpenBuilds Team

    Joined:
    Apr 13, 2016
    Messages:
    649
    Likes Received:
    639
    Great hack. May try this on my Cricut!
     
  5. MattR

    MattR New
    Builder

    Joined:
    Mar 5, 2016
    Messages:
    7
    Likes Received:
    15
    Thank you everyone! I will definitely try the OpenBuilds CAM software.
     
  6. Anthony Bolgar

    Anthony Bolgar Journeyman
    Builder

    Joined:
    Jan 14, 2016
    Messages:
    354
    Likes Received:
    198
    And then you would have built you first project finally! :)
     
    MaryD likes this.
  7. 128mb

    128mb New
    Builder

    Joined:
    Jul 1, 2019
    Messages:
    1
    Likes Received:
    0
    Good job my friend . I have 3 cricut expression , I´ll try to do the same, thank you so much for show us your project.
     
  8. DaviesD

    DaviesD New
    Builder

    Joined:
    Oct 3, 2019
    Messages:
    1
    Likes Received:
    0
    @MaryD sorry for being off topic. Wanted to ask you how happy are you with your cricut and would you recommend it for a newbie.

    I'm looking for a desktop cutting machine. And I'm clueless which would be the best for me.

    Maybe you can help me out a bit. So far what I got is this. Cricut has a horrible support is this true? I've read it on another forum. Secondly there's almost no decent review out there because it's just hype.

    I've managed to find a blog that seems to be legit. The blogger is almost doing a hatchet job with the machine but it's entertaining. Here's what put me on the fence cricut maker vs silhouette cameo 3. Is it this bad or she's exaggerating?

    Did cricut fix the online only issue? What about having access to 100+ materials would that help me or hinder me. Any tips are welcome.
     
  9. MaryD

    MaryD OpenBuilds Team

    Joined:
    Apr 13, 2016
    Messages:
    649
    Likes Received:
    639
    My cricut is older. Lacks the flexibility of creating your own designs. I have to buy cartridges for graphics. Looking at the link provided the Auto Blade would be a nice feature. I have wasted time and materials in the past trying to get the cut rate and depth correct.

    The downside to all of these is that they need constant care and feeding ie: replacement blades, mats. The results can be amazing.

    Let me know what you decide!
     
  10. MattR

    MattR New
    Builder

    Joined:
    Mar 5, 2016
    Messages:
    7
    Likes Received:
    15
    If I were buying a machine that I expected to just work out of the box, is go for one of the us cutter models that include surecuts. The workflow I use now is fine for me but my spouse refuses to learn it... But when we used a different cutter and surecuts (or sure cuts a lot, I forget) it was super easy to use.

    I would never buy a cricut unless I was going to hack it due to their business decisions.
     
  11. Tag Scott

    Tag Scott New
    Builder

    Joined:
    Nov 19, 2019
    Messages:
    1
    Likes Received:
    1
    I am trying to replicate this build but using a different board. what did you use the TIP120 and Diode for? Could you give a little more description on the MOFSET wiring?
     
    MEDLAID likes this.
  12. MattR

    MattR New
    Builder

    Joined:
    Mar 5, 2016
    Messages:
    7
    Likes Received:
    15
    I used it to turn the solenoid on/off really quickly. If you provided a lower voltage source for the solenoid (9-12v?) Then you could just use a relay.
     
  13. SammyCiste

    Builder

    Joined:
    Feb 29, 2020
    Messages:
    1
    Likes Received:
    0
    @MattR would you recommend this Cricut machine? Are you happy with it?

    Sorry for being off topic.

    I'm in the market for a vinyl cutter and I sure could use some help. Where did you get started? Because there are a number to choose from. At the moment I don't want to shell out a lot of money so I was looking at desktop vinyl cutters. I've got tired of all the hype reviews that were on the net. And actually managed to find one that seems legit. On this website I've found a review that was critical. It actually showed the flaws of each machines. What do you think which one would be better.

    Any help is appreciated
     
  14. MattR

    MattR New
    Builder

    Joined:
    Mar 5, 2016
    Messages:
    7
    Likes Received:
    15
    I have no real opinion of them. Probably just go for the cheapest you can find if you are interested in hacking it and only want to cut paper/vinyl and plot stuff. If you are only interested in those same things but not interested in modifying them, I'd lean towards the low end USCutter stuff (I had one and loved it). For cutting thicker stuff than that, it looks like the site you linked to gives a good comparison (the USCutter only has 350g of cutting force and I don't expect the Cricut Expressions 2 that I have is any higher but can't find any specs).
     
  15. Nitrous

    Nitrous New
    Builder

    Joined:
    Jun 26, 2023
    Messages:
    2
    Likes Received:
    0
    this is a great build! Any reason to think this approach couldn't work with ANY of the cricut/robocraft vinyl cutter platforms?
     
  16. Nitrous

    Nitrous New
    Builder

    Joined:
    Jun 26, 2023
    Messages:
    2
    Likes Received:
    0
    does your transplant utilize the optical encoders in some (?all) of these machines?
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice