Welcome to Our Community

Some features disabled for guests. Register Today.

1075 Sphinx

Discussion in 'CNC Mills/Routers' started by NeeqOne, Jun 22, 2018.

  1. NeeqOne

    NeeqOne Well-Known
    Builder

    Joined:
    Mar 3, 2018
    Messages:
    46
    Likes Received:
    27
    Thanks. I will get a very good square and tram the axes.
     
  2. GrayUK

    GrayUK Openbuilds Team Elder
    Staff Member Moderator Builder

    Joined:
    May 5, 2014
    Messages:
    1,668
    Likes Received:
    627
    At least you have a nice square spindle to line up with. What size spindle are you using?
     
  3. NeeqOne

    NeeqOne Well-Known
    Builder

    Joined:
    Mar 3, 2018
    Messages:
    46
    Likes Received:
    27
  4. GrayUK

    GrayUK Openbuilds Team Elder
    Staff Member Moderator Builder

    Joined:
    May 5, 2014
    Messages:
    1,668
    Likes Received:
    627
    I couldn't see from your photo which way you were running your Spindle, when leveling.
    1.5KW spindles are really quite heavy and it worries me that you might be getting twist on the X azis.
     
  5. NeeqOne

    NeeqOne Well-Known
    Builder

    Joined:
    Mar 3, 2018
    Messages:
    46
    Likes Received:
    27
    I was running pocketing along the X axis. That is what is worrying me too. I have put it up for sale. I will be downgrading to a 800W water cooled one.
     
    GrayUK likes this.
  6. ashish B

    ashish B New
    Builder

    Joined:
    Feb 18, 2017
    Messages:
    58
    Likes Received:
    5
    Did you ever resolve it ?
     
  7. NeeqOne

    NeeqOne Well-Known
    Builder

    Joined:
    Mar 3, 2018
    Messages:
    46
    Likes Received:
    27
    I have made some adjustment to my spindle. I will test the tomorrow and report back.
     
  8. NeeqOne

    NeeqOne Well-Known
    Builder

    Joined:
    Mar 3, 2018
    Messages:
    46
    Likes Received:
    27
    The Z and X are not perpendicular. I used some shims on the lower part of the spindle. However, it seems there are a bit bigger than need. I will try different shims and test again. The difference in heights between the layers are reduced drastically.

    20181103_162253.jpg 20181103_162323.jpg
     
    GrayUK likes this.
  9. NeeqOne

    NeeqOne Well-Known
    Builder

    Joined:
    Mar 3, 2018
    Messages:
    46
    Likes Received:
    27
    I used one of my feeler gauge to adjust the spindle and tested it on another MDF. Results were much better this time.

    20181117_093222.jpg
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice