Welcome to Our Community

Some features disabled for guests. Register Today.

TEVO Little Monster Direct Mount Extruder

Discussion in '3D printers' started by h3rb, Mar 19, 2018.

  1. h3rb

    h3rb New
    Builder

    Joined:
    Mar 12, 2018
    Messages:
    3
    Likes Received:
    0
    h3rb published a new build:

    Read more about this build...
     
  2. JustinTime

    JustinTime Veteran
    Builder

    Joined:
    Dec 18, 2013
    Messages:
    756
    Likes Received:
    252
    I tried all three links you have on the build page and all of them are not valid. Aliexpress and Home Depot say there is not such product and the eBay link says the search came up with zero results.
     
  3. h3rb

    h3rb New
    Builder

    Joined:
    Mar 12, 2018
    Messages:
    3
    Likes Received:
    0
    Sorry to hear that, those links worked for me. I'll try to fix the links but ultimately you can find them this way:

    MK8 clone All-Metal extruder (search ebay or aliexpress or banggood for MK8 Metal Extruder)
    It's the purple one, or you can try gold, or you can just use the extruder it came with.

    Tie Plate: Search Home Depot website (or just show up and find the galvanized stud section in the home building area) and look for a tie plate that matches the dimensions (or get an even longer one if you want)

    1-13/16 in. x 5 in. Tie Plate
    Model # TP15
    Internet #100375260
    Store SKU #464236
    Store SO SKU #592854

    Steel tube:
    You can buy this on Amazon or Ebay. Amazon: https://www.amazon.com/gp/product/B01N7D6AMN

    The one I bought was $19.99 and is called
    304 Stainless Steel Tubing, Length 12" (30 cm), Tube Out Diameter OD 0.5 to 12 mm, Pack of 8
    But you only need the one that will fit PTFE PC4/01 connectors, which I believe is the OD 3mm one. You can buy that on Ebay for $3 or less 5pcs 304 Stainless Steel Capillary Tube OD 3mm x 2mm ID Length 250mm | eBay

    It's also known as "Capillary Tube" -- make sure not to get the ones with the rubberized interior. O.D. (outer diameter) 3mm tube is 2mm interior width (fits 1.75mm filament)

     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice