Welcome to Our Community

Some features disabled for guests. Register Today.

4ftx3ft mega2560 ramps laser build help?

Discussion in 'Laser Cutters' started by kenny h, Feb 9, 2018.

  1. kenny h

    kenny h New
    Builder

    Joined:
    Feb 9, 2018
    Messages:
    23
    Likes Received:
    4
    okay i just started this project i have a few questions .... i am building a 2020 frame with dual yaxis stepper motors and a single x axis stepper how am i to connect 2 y axis steppers to the ramps 1.4 ? also what firmware is best for this? i currently have the newest build of skynet installed on my board. and will the z axis endstop cause me a fit not being installed ? thanks
     
  2. kenny h

    kenny h New
    Builder

    Joined:
    Feb 9, 2018
    Messages:
    23
    Likes Received:
    4
    also for now im using a 500mw blue diode laser will update to a 5w later it has a external driver with ttl
     
  3. MaryD

    MaryD OpenBuilds Team

    Joined:
    Apr 13, 2016
    Messages:
    649
    Likes Received:
    639
    Just want to say that I can't wait to see this build!
     
  4. kenny h

    kenny h New
    Builder

    Joined:
    Feb 9, 2018
    Messages:
    23
    Likes Received:
    4
    Ill upload pics today after the mailman brings me some goodies
     
    MaryD likes this.
  5. kenny h

    kenny h New
    Builder

    Joined:
    Feb 9, 2018
    Messages:
    23
    Likes Received:
    4
    Getting started on this monster. 4ft x 3ft 10in
     

    Attached Files:

    MaryD likes this.
  6. kenny h

    kenny h New
    Builder

    Joined:
    Feb 9, 2018
    Messages:
    23
    Likes Received:
    4
    A work in progress
     

    Attached Files:

  7. kenny h

    kenny h New
    Builder

    Joined:
    Feb 9, 2018
    Messages:
    23
    Likes Received:
    4
    ok i have a problem i have solved my dual y axis problem i believe but my steppers will not move just make noise ive tried to switch the wiring around for my steppers still no change ?? sorta of a click/hum
     
  8. JustinTime

    JustinTime Veteran
    Builder

    Joined:
    Dec 18, 2013
    Messages:
    756
    Likes Received:
    252
    If your stepper will not move but just make a hum you may want to check the amps setting. It may be too low.
     
  9. kenny h

    kenny h New
    Builder

    Joined:
    Feb 9, 2018
    Messages:
    23
    Likes Received:
    4
    I have tried turning them up and down and switching the wires .They wont even move with no load on them could it be a setting with my marlin firmware ?
     
  10. kenny h

    kenny h New
    Builder

    Joined:
    Feb 9, 2018
    Messages:
    23
    Likes Received:
    4
    well i killed my board waiting for replacement ..... im starting from scratch new board new firmware new drivers and if that dont work new power supply im using 5amp 12v psu currently do i need more than 5 amp to frive 3 stepper motors?
     
  11. JustinTime

    JustinTime Veteran
    Builder

    Joined:
    Dec 18, 2013
    Messages:
    756
    Likes Received:
    252
    On my 3d printer, which is similar in construction, I use a computer power supply rated at 360W which is about 30A. Take away the extruder heater and you are still left with more than 10A.
     
  12. kenny h

    kenny h New
    Builder

    Joined:
    Feb 9, 2018
    Messages:
    23
    Likes Received:
    4
    Ok ty ill upgrade the psu
     
  13. kenny h

    kenny h New
    Builder

    Joined:
    Feb 9, 2018
    Messages:
    23
    Likes Received:
    4
    we got movement some firmware tweaks and finalize wiring and then testing
     
  14. kenny h

    kenny h New
    Builder

    Joined:
    Feb 9, 2018
    Messages:
    23
    Likes Received:
    4
    ok i got some wire organizing to do everything seems to function but!!!!!! i have no clue on hot to use the lasr setting in marlin my laser pin is set to 44 for ttl i have my laser wired up but it does not seem to turn on/off?
     
  15. kenny h

    kenny h New
    Builder

    Joined:
    Feb 9, 2018
    Messages:
    23
    Likes Received:
    4
    Well its alive and doing something lol
     

    Attached Files:

    GrayUK likes this.
  16. kenny h

    kenny h New
    Builder

    Joined:
    Feb 9, 2018
    Messages:
    23
    Likes Received:
    4
    now having issues with ttl control on laser but will figure it out
     
  17. kenny h

    kenny h New
    Builder

    Joined:
    Feb 9, 2018
    Messages:
    23
    Likes Received:
    4
    can someone why my machine will not auto home y axis please i uploaded my firmware
     

    Attached Files:

  18. kenny h

    kenny h New
    Builder

    Joined:
    Feb 9, 2018
    Messages:
    23
    Likes Received:
    4
  19. JustinTime

    JustinTime Veteran
    Builder

    Joined:
    Dec 18, 2013
    Messages:
    756
    Likes Received:
    252
    I reassembled yesterday my 3d printer after is was in storage for months. It uses the RAMPS 1.4 board. When I finished none of the axes would home. Turned out I connected the limit switches in the wrong place. On the board there are six locations for the limit switches, two for each axis. I had put the connectors on the location for each axis rather than the first. When I changed it to the first it homed. Can it be that your y axis limit switch is also in the wrong location?
     
  20. kenny h

    kenny h New
    Builder

    Joined:
    Feb 9, 2018
    Messages:
    23
    Likes Received:
    4
    i figured it out when i used the option to lighten the firmware up it did something to my firmware i rebuilt the firmware from scratch all works now
     
  21. kenny h

    kenny h New
    Builder

    Joined:
    Feb 9, 2018
    Messages:
    23
    Likes Received:
    4
    its working fine now just have to learn how to use inkscape lol
     

    Attached Files:

    JustinTime likes this.
  22. kenny h

    kenny h New
    Builder

    Joined:
    Feb 9, 2018
    Messages:
    23
    Likes Received:
    4


    got octiprint working on my laser i will get this thing figured out someday
     
  23. kenny h

    kenny h New
    Builder

    Joined:
    Feb 9, 2018
    Messages:
    23
    Likes Received:
    4
    Striped a mini desktop pc shoved a power supply ramps and raspi inside now soldering 80 wires fun
     

    Attached Files:

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice