Welcome to Our Community

Some features disabled for guests. Register Today.

Sewing Machine Lift

Discussion in 'Other Builds' started by fshanno, Jan 16, 2018.

  1. fshanno

    fshanno New
    Builder

    Joined:
    Jan 16, 2018
    Messages:
    2
    Likes Received:
    0
    I'm building a power lift for a sewing machine. It needs to lift and hold firmly a 35lb sewing machine. It will be cycled only rarely but it will have to hold the load indefinitely. Speed is not an issue, in fact it needs to be rather slow. Would an actuator of the type here at Openbulds be appropriate?

    I suppose it would need linear bearings as well or perhaps an actuator at each end of the platform.

    There is one off the shelf unit built specifically for sewing machines that sells for $650.
     
  2. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Dec 20, 2013
    Messages:
    2,855
    Likes Received:
    1,525
    Yes but only if you use a considerably less aggressive screw. The weight of the machine would overpower the supplied TR8x8 the instant the steppers were shut off and the machine would drop. I would suggest dropping back to a 5/16-18 all-thread rod or a TR8x2. You will also need thrust bearings at the top to properly support the vertical screws.
     
  3. fshanno

    fshanno New
    Builder

    Joined:
    Jan 16, 2018
    Messages:
    2
    Likes Received:
    0
    Question. Would a motor with reduction gear and a small rack and pinion be a better option?
     
  4. Joe Santarsiero

    Joe Santarsiero OB addict
    Staff Member Moderator Builder

    Joined:
    Oct 30, 2014
    Messages:
    902
    Likes Received:
    196
    Can you counterweight it?
     
  5. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Dec 20, 2013
    Messages:
    2,855
    Likes Received:
    1,525

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice