Welcome to Our Community

Some features disabled for guests. Register Today.

ooznest cnc mechanical kit now what do I buy ??

Discussion in 'CNC Mills/Routers' started by graycbr, Nov 18, 2017.

  1. graycbr

    graycbr New
    Builder

    Joined:
    Nov 13, 2017
    Messages:
    8
    Likes Received:
    0
    hi guys
    Just brought the above kit ...
    Now the spindle & electronics side I've got to get my head around ????
    So many difference options I've fried my head ...
    Weight of spindle = which size motors = which size controller board = which size power size ahhhh ...
    I'm going to use this setup on MDF 18mm ,Softwood 20mm max most of the time making signs etc .. Will be doing the odd soft metal work 3-4mm etc ..
    So what should I get now spindle first then get the rest of hardware to match needs of spindle/router ...
    Ooznest seem to use the following
    cnc xpro v3
    24v 350w
    nema23 177.5oz motor
    dewalt D26200
    Should I get the above setup ?
    Any views & links would be great as I don't know what to do now ...
     
  2. Flash22

    Flash22 Well-Known
    Builder

    Joined:
    Sep 1, 2015
    Messages:
    159
    Likes Received:
    42
    what kit ? and what size ?
     
  3. graycbr

    graycbr New
    Builder

    Joined:
    Nov 13, 2017
    Messages:
    8
    Likes Received:
    0
    1000x1000mm
    ooznest cnc mechanical kit as in title ...
     
  4. Flash22

    Flash22 Well-Known
    Builder

    Joined:
    Sep 1, 2015
    Messages:
    159
    Likes Received:
    42
    well there all cnc there is the C Beam, OX and workbee that's why I asked

    As its 1m x 1m I would look at going with individual drivers rather than a xpro that way it gives you room to upgrade
     
  5. graycbr

    graycbr New
    Builder

    Joined:
    Nov 13, 2017
    Messages:
    8
    Likes Received:
    0
    Fair point OX system Just ordered ...
    Which drivers would you say ,as got no idea at the moment as know nothing on cnc ....
     
  6. graycbr

    graycbr New
    Builder

    Joined:
    Nov 13, 2017
    Messages:
    8
    Likes Received:
    0
    room to upgrade ?
    Buy right first time shouldn't need to upgrade this is why I'm asking you guys which have a good idea of setup to get ....
    I'm just after a good setup don't mind which way to go ,just needs to be stable & do what I would like ..
    plz guys help me to do this right ...
    any views tips or any advice would be great help as well confused now read to much info aahhh
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice