Welcome to Our Community

Some features disabled for guests. Register Today.

Viking OX

Discussion in 'CNC Mills/Routers' started by Knut Bøje, Aug 18, 2015.

  1. Knut Bøje

    Builder

    Joined:
    Nov 20, 2014
    Messages:
    20
    Likes Received:
    23
  2. Davis Composites

    Builder

    Joined:
    Oct 7, 2014
    Messages:
    5
    Likes Received:
    0
    Knut,
    Your build looks nice and stout...will you post where you picked up all of the parts and bits...the Viking looks like what I want to build.
    Thanks...
     
  3. Knut Bøje

    Builder

    Joined:
    Nov 20, 2014
    Messages:
    20
    Likes Received:
    23
    Of course.
    Ball Screws, End Support and HIWIN linear rails is from BST Automation at Aliexpress.
    The Z Axis is from microcarve on e-bay.
     
  4. Gunnar Norum

    Builder

    Joined:
    May 7, 2016
    Messages:
    2
    Likes Received:
    0
    Looks great. Thinking of upgrading my stainless OX... 2.2KW spindle is a bit on the heavy side for stock.
     
  5. gta18

    gta18 New
    Builder

    Joined:
    Jul 20, 2016
    Messages:
    26
    Likes Received:
    1
    Is that a 2505 screw or 1605?
     
  6. Knut Bøje

    Builder

    Joined:
    Nov 20, 2014
    Messages:
    20
    Likes Received:
    23
    No. I use 2005 screws.
     
  7. gta18

    gta18 New
    Builder

    Joined:
    Jul 20, 2016
    Messages:
    26
    Likes Received:
    1
    2005 and Nema23's? How are your steppers handling it in terms of speed?

    Asking because I'm in the process of building a 1500x1500 and I have oversized and bought 2505's for my Nema 23.


    Thanks!

     
  8. nocturnalit

    Builder

    Joined:
    Jun 27, 2021
    Messages:
    3
    Likes Received:
    0
    How are the 3d printed motors mounts holding up? how many perimeters/infill did you use? I'm tossing up between 3d printed vs Spacer shafts.
     
  9. JustinTime

    JustinTime Veteran
    Builder

    Joined:
    Dec 18, 2013
    Messages:
    756
    Likes Received:
    252
    I don't have this machine but mine is also homemade. My motor mounts are printed from ABS+, are 20mm thick and I printed them with 3 perimeter and 40% infill. I have both NEMA 23 and 34, 2 of each.
    So far I have no issues at all but I have to admit I don't clock many hours of operations on my machine.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice