Welcome to Our Community

Some features disabled for guests. Register Today.

Easy to build and robust 3D printer framework

Discussion in '3D printers' started by Jesse Gordon, Jun 20, 2015.

  1. Jesse Gordon

    Builder

    Joined:
    Jun 20, 2015
    Messages:
    4
    Likes Received:
    2
    Jesse Gordon published a new build:

    Read more about this build...
     
  2. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,742
    Likes Received:
    2,407
    Hello @Jesse Gordon
    You have some great ideas on the way your mounting the wheels to your system.
    Keep up the great work and thank you for sharing
    Mark
     
  3. Jesse Gordon

    Builder

    Joined:
    Jun 20, 2015
    Messages:
    4
    Likes Received:
    2
    I tried making a screw type extruder but I think it needs some modifications before it works right.

    Anyway, I got motors mounted for X and Z, and also X and Z cable drag chains installed and the Y drag chain sized and planned.

    I also have 250 feet of stranded cat 5 which I intend to try to use for encoder signals using RS422 twisted pair and I might even try running the motors on the remaining pair. ha ha. I'll draw fire from the readers for running a motor on a long 24awg wire if I don't draw fire from my wiring harness, but they are 24 or 48v motors so they will have reduced current.. I hope..

    Sorry about the quality of the photo - lighting and background make for an awful picture but it was quick and I was in a hurry!

    deleteme.jpg
     
  4. Jesse Gordon

    Builder

    Joined:
    Jun 20, 2015
    Messages:
    4
    Likes Received:
    2
    I'm still alive! Life's been crazy, but I'm working toward freeing up some time, Lord willing this year, to work on this again!
     
  5. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,742
    Likes Received:
    2,407
    Freeing up time can be a hard thing to do for sure. Hope your able to get back to it soon! :thumbsup:
     
  6. Jesse Gordon

    Builder

    Joined:
    Jun 20, 2015
    Messages:
    4
    Likes Received:
    2
    Hey I'm still here! And believe it or not, this project is still sitting on my kitchen table... Have not forgot about it, or you guys! Life just has its way of taking you for a ride!

    Anyway, I got an email that I have an unpublished build. This confuses me, I seem to have a published one that has lots of pictures and an unpublished one that doesn't show the pictures. I have no recollection why I'd have two builds on the same project, one published and one unpublished. Should I just delete the shorter unpublished one?

    Thanks!

    Jesse
     
  7. MaryD

    MaryD OpenBuilds Team

    Joined:
    Apr 13, 2016
    Messages:
    649
    Likes Received:
    639

    Yes Jesse, may as well clean up the old one and make room for new builds! Thank you.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice