Welcome to Our Community

Some features disabled for guests. Register Today.

Big OX 1500x1000

Discussion in 'CNC Mills/Routers' started by Zach S, Jul 3, 2017.

  1. Zach S

    Zach S New
    Builder

    Joined:
    May 26, 2017
    Messages:
    48
    Likes Received:
    24
    I's not allowing me to post it
     
  2. Zach S

    Zach S New
    Builder

    Joined:
    May 26, 2017
    Messages:
    48
    Likes Received:
    24
    What is the recommended post processor for usg?
     
  3. Taz-Digs

    Taz-Digs New
    Builder

    Joined:
    Mar 27, 2016
    Messages:
    25
    Likes Received:
    3
    Never used this app, so I don't know what it allows and does not? so it does not let you post. What size tool do you have selected? What side of the line is the tool on?
     
  4. Zach S

    Zach S New
    Builder

    Joined:
    May 26, 2017
    Messages:
    48
    Likes Received:
    24
    It's a .25 end mill and it's set to cut of the outside of the line.
     
  5. Taz-Digs

    Taz-Digs New
    Builder

    Joined:
    Mar 27, 2016
    Messages:
    25
    Likes Received:
    3
    is the software set up in inches or mm? is the machine set up in the same units? If you are programming in inches and the machine is thinking it is getting MM, it will be wrong.
     
  6. Zach S

    Zach S New
    Builder

    Joined:
    May 26, 2017
    Messages:
    48
    Likes Received:
    24
    My Vcarve is set to gcode (inch) (*.tap) and my machine controls are on the inches
     
  7. Zach S

    Zach S New
    Builder

    Joined:
    May 26, 2017
    Messages:
    48
    Likes Received:
    24
    With the original grbl settings i was able to cut a profile circle, just the depth was off. Now it's just doing a whole. Buddy I'm going to have to send you a beer when this is all done.
     
  8. Taz-Digs

    Taz-Digs New
    Builder

    Joined:
    Mar 27, 2016
    Messages:
    25
    Likes Received:
    3
    it appears to me that your issue is not your machine, it may be the software. one way to test is to use some other software. I use fusion 360. you could create a circle in this app and test.
     
  9. Zach S

    Zach S New
    Builder

    Joined:
    May 26, 2017
    Messages:
    48
    Likes Received:
    24
    I will try it out
     
  10. Taz-Digs

    Taz-Digs New
    Builder

    Joined:
    Mar 27, 2016
    Messages:
    25
    Likes Received:
    3
    so you are good now?
     
  11. Zach S

    Zach S New
    Builder

    Joined:
    May 26, 2017
    Messages:
    48
    Likes Received:
    24
    No not yet
     
  12. Taz-Digs

    Taz-Digs New
    Builder

    Joined:
    Mar 27, 2016
    Messages:
    25
    Likes Received:
    3
    What else are you having an issue with? still not cutting the 2 inch diameter?
     
  13. Zach S

    Zach S New
    Builder

    Joined:
    May 26, 2017
    Messages:
    48
    Likes Received:
    24
    Correct. I'm going to step away from the machine for a bit before i get anymore frustrated.
     
  14. Taz-Digs

    Taz-Digs New
    Builder

    Joined:
    Mar 27, 2016
    Messages:
    25
    Likes Received:
    3
    I understand. Reach out if you need anything. I have a 1000 X 1500 I built. I am almost done dialing in the calibration.
     
  15. Zach S

    Zach S New
    Builder

    Joined:
    May 26, 2017
    Messages:
    48
    Likes Received:
    24
    What are you grbl settings? Maybe i could try them
     
  16. Taz-Digs

    Taz-Digs New
    Builder

    Joined:
    Mar 27, 2016
    Messages:
    25
    Likes Received:
    3
    I am using a tinyg so it will not help you.I have a CNC machinist background and have built a couple of 3D printers so I was just helping out.
     
  17. Zach S

    Zach S New
    Builder

    Joined:
    May 26, 2017
    Messages:
    48
    Likes Received:
    24
    ah Okay! Well I'll definitely keep in touch and let you know what i figure out Thanks again for the help
     
  18. Taz-Digs

    Taz-Digs New
    Builder

    Joined:
    Mar 27, 2016
    Messages:
    25
    Likes Received:
    3
    When you get a minute or feel like getting back to it, can you post a video of the hole running or an image.
     
  19. Zach S

    Zach S New
    Builder

    Joined:
    May 26, 2017
    Messages:
    48
    Likes Received:
    24
    Yes will do
     
  20. Zach S

    Zach S New
    Builder

    Joined:
    May 26, 2017
    Messages:
    48
    Likes Received:
    24
    Hey Taz, changed the file to an mmg and I think i'm on to something got it to cut at .25 and a circle. I used the same pp as the axiom I have access to at work. I cannot thank you enough for your time man!
     
  21. Zach S

    Zach S New
    Builder

    Joined:
    May 26, 2017
    Messages:
    48
    Likes Received:
    24
    Just got to fine tune it now. Thanks again for your help!
     
  22. Taz-Digs

    Taz-Digs New
    Builder

    Joined:
    Mar 27, 2016
    Messages:
    25
    Likes Received:
    3
    Anytime. Just reach out if get into a snag or need some more help
     
  23. Zach S

    Zach S New
    Builder

    Joined:
    May 26, 2017
    Messages:
    48
    Likes Received:
    24
    Will do!
     
  24. bigred3002

    Builder

    Joined:
    Aug 10, 2017
    Messages:
    1
    Likes Received:
    0
    Hey Zach,

    What has been your total cost so far? I've been looking to build a similar machine to yours but I haven't started pricing things out yet. I'm just curious if you don't mind sharing.
     
  25. Zach S

    Zach S New
    Builder

    Joined:
    May 26, 2017
    Messages:
    48
    Likes Received:
    24
    Hey bud,

    I think I'm in it roughly around $1,300, That's included some extras I had to purchase to get my computer updated to work. Hope that helps. If you need any assistance feel free to ask away.
    V/R
    Zach S
     
  26. joel chavez

    Builder

    Joined:
    Aug 10, 2017
    Messages:
    2
    Likes Received:
    0
    How much did your cnc cost
     
  27. Zach S

    Zach S New
    Builder

    Joined:
    May 26, 2017
    Messages:
    48
    Likes Received:
    24
    Roughly $1,300
     
  28. joel chavez

    Builder

    Joined:
    Aug 10, 2017
    Messages:
    2
    Likes Received:
    0
    Looks real nice
     
  29. Zach S

    Zach S New
    Builder

    Joined:
    May 26, 2017
    Messages:
    48
    Likes Received:
    24
    Thanks man! Let me know if you need assistance setting yours up.
     
  30. SherlockMei

    Builder

    Joined:
    Nov 5, 2017
    Messages:
    4
    Likes Received:
    0
    I'm building a OX just follow yours.
    it have same size, 1500x1000 ,it's so big.
    Thank's for your photo and details.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice