Welcome to Our Community

Some features disabled for guests. Register Today.

Specs for C-Beam Plates!

Discussion in 'CNC Mills/Routers' started by PaulJones, Jul 12, 2017.

  1. PaulJones

    PaulJones New
    Builder

    Joined:
    Jul 9, 2017
    Messages:
    20
    Likes Received:
    1
    Building my first C-Beam, CNC and I have decided to build my plates from 9mm Marine Ply just until I get it built and can then cut the plates from Aluminium.

    Where would I find the plate specs to enable me to cut the first plates from ply?
     
  2. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Dec 20, 2013
    Messages:
    2,855
    Likes Received:
    1,525
    In order for us to point you in the right direction on plates you're going to have to give us a much better idea of what you are building. You call it a c-beam here but in another post it sounds like you are describing an Ox.

    BTW, if you plan to cut aluminum with this you need to be thinking more along the lines of 15mm ply.
     
  3. David the swarfer

    David the swarfer OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Aug 6, 2013
    Messages:
    3,239
    Likes Received:
    1,815
    OX plates are in the drawings under 'Files and drawings'
    OpenBuilds OX CNC Machine
    Same for C-beam stuff
    C-Beam™ Machine - Plate Maker
     
  4. PaulJones

    PaulJones New
    Builder

    Joined:
    Jul 9, 2017
    Messages:
    20
    Likes Received:
    1
    Sorry for the confusion guys. I am a real newbie at this.

    I suppose what I am going to build is an OX with a C-Beam X-Axis. Maybe I should call it the C-OX!.....???

    The gantry will move along the Y-Axis, just like the OX and I plan on using threaded rod. So I need plates to suit.

    Surely someone has used a C-Beam in place of the 2- 2060's used on the OX. Or perhaps I am the first?
     
  5. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Dec 20, 2013
    Messages:
    2,855
    Likes Received:
    1,525
    Sounds like you are wanting to build a Sphinx. Check the files tab for plates.
     
  6. PaulJones

    PaulJones New
    Builder

    Joined:
    Jul 9, 2017
    Messages:
    20
    Likes Received:
    1
    thanks Rick......it's nearly what I am after.

    I am trying to find a build that only uses C-Beam for the X axis. The Y-axis is 2080.

    So I am looking for plates that will bolt the C-Beam on the X axis and has the normal Y axis design using the 2080 V-slot rail.
     
  7. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Dec 20, 2013
    Messages:
    2,855
    Likes Received:
    1,525
    Mark Carew likes this.
  8. PaulJones

    PaulJones New
    Builder

    Joined:
    Jul 9, 2017
    Messages:
    20
    Likes Received:
    1
    Thanks Rick. I will take a look at those. I really appreciate your help. Thank you again.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice