Welcome to Our Community

Some features disabled for guests. Register Today.

WIN a Free Smoothieboard! [CLOSED]

Discussion in '* CONTESTS * Win Cool Stuff!' started by MaryD, Mar 21, 2017.

Thread Status:
Not open for further replies.
  1. Coen_l

    Coen_l New
    Builder

    Joined:
    Mar 28, 2017
    Messages:
    1
    Likes Received:
    1
    I would swap my fried XYZ Da Vinci mainboard for the Smoothieboard and make it a
    Wolf in sheep's clothes

    Then start printing RC planes and other cool stuff again. :)
     
    MaryD likes this.
  2. Anthony Z. Davis

    Builder

    Joined:
    Mar 28, 2017
    Messages:
    1
    Likes Received:
    1
    Hello, my name is Alessandro (Anthony Z. Davis is my pen name) and I’m a 21 years old dedicated and passionate model builder and designer and 3D printer enthusiast who joined such an amazing community to share all my future projects.

    The reason I joined this contest is that I'm currently working on a 400 x 400 x 400 mm 3D printer which I like to call "Print'O'matic", and it's my humble opinion that a fresh new Smoothieboard would make such a fine addition to its electronic system.
    Besides, my Print'O'matic, together with my TronXY P802MA, would make a fine "support" printer whenever I'll decide to finally open a 3D printing online shop.

    I think that’s about all there is to know about me. I hope you enjoyed getting to know me better. Thank you very much for reading. :)
     
    MaryD likes this.
  3. wmelendez

    wmelendez New
    Builder

    Joined:
    Jan 25, 2017
    Messages:
    3
    Likes Received:
    3
    A Delta 3D Printer!
     
    MaryD likes this.
  4. animoose

    animoose New
    Builder

    Joined:
    Nov 25, 2015
    Messages:
    1
    Likes Received:
    1
    On my modified Eclips3D CoreXY, so I can convert it to dual extruder (perhaps mirror twin Titans!).
     
    MaryD likes this.
  5. Miguel Frade

    Builder

    Joined:
    Mar 6, 2017
    Messages:
    1
    Likes Received:
    1
    I'm building my MACH2 and it will perfect to adopt this Smoothieboard. Maybe one day.
     
    MaryD likes this.
  6. Lafy

    Lafy New
    Builder

    Joined:
    Mar 24, 2017
    Messages:
    1
    Likes Received:
    1
    Stepper powered quadcopter!
     
    MaryD likes this.
  7. Alex krause

    Builder

    Joined:
    Dec 29, 2015
    Messages:
    17
    Likes Received:
    82
    My Ox of course... :) Kit from smw3d
     
    MaryD likes this.
  8. adam Tulin

    Builder

    Joined:
    Sep 28, 2016
    Messages:
    1
    Likes Received:
    1
    I would use it for a 200x300x300 build size 3D printer built with c-beams.
     
    MaryD likes this.
  9. Somgri

    Somgri New
    Builder

    Joined:
    Feb 5, 2017
    Messages:
    1
    Likes Received:
    1
    I'll use it for create my procject of a DIY 3D printer, based on a 3D printer core XY (C-bot) with a Igus drylin Q for the movements.
    [​IMG]
     
    MaryD likes this.
  10. itay

    itay New
    Builder

    Joined:
    Mar 20, 2017
    Messages:
    1
    Likes Received:
    1
    Sand drip 3d printer
     
    MaryD likes this.
  11. Don Crawford

    Builder

    Joined:
    Feb 14, 2017
    Messages:
    17
    Likes Received:
    15
    I would build either a BeTrue3D or the TrueUp Glide.
     
    MaryD likes this.
  12. ChrisCassin

    Builder

    Joined:
    Jun 2, 2016
    Messages:
    4
    Likes Received:
    1
    A FREAKIN LASER engraver!
     
    MaryD likes this.
  13. mkolsen22

    mkolsen22 New
    Builder

    Joined:
    Jan 11, 2014
    Messages:
    13
    Likes Received:
    6
    Cartesian CNC router. I've been toying with the idea of the Stinger design because I already have the Nema 17 stepper motors.
     
    MaryD likes this.
  14. Fezziwig

    Fezziwig New
    Builder

    Joined:
    Aug 13, 2015
    Messages:
    1
    Likes Received:
    1
    replacing the grbl shield on my 750mm x 1000m (ish) cnc I built with pieces from openbuild and inventables
     
    MaryD likes this.
  15. involved6

    involved6 New
    Builder

    Joined:
    Mar 15, 2017
    Messages:
    2
    Likes Received:
    1
    Gino's C-Beam-GTC!
     
    MaryD likes this.
  16. humble_brag

    Builder

    Joined:
    Mar 30, 2017
    Messages:
    1
    Likes Received:
    1
    My supersized freestanding I3 based in part on the OneZ. I'm still gathering parts but more the frame is coming along!
     
    MaryD likes this.
  17. Craig Anderson

    Builder

    Joined:
    Feb 9, 2016
    Messages:
    56
    Likes Received:
    15
    A Voxel OX!
     
    MaryD likes this.
  18. juankroi

    juankroi New
    Builder

    Joined:
    Mar 30, 2017
    Messages:
    2
    Likes Received:
    1
    I would build a brand new delta for this board!
     
    MaryD likes this.
  19. AcBCDN

    AcBCDN New
    Builder

    Joined:
    Mar 16, 2014
    Messages:
    7
    Likes Received:
    3
    I will used for C-bot Core XY 3D-Printer with a laser engraver option. :)
     
    MaryD and AS-3DDruck like this.
  20. DougW

    DougW New
    Builder

    Joined:
    Mar 23, 2017
    Messages:
    2
    Likes Received:
    1
    I'd use it to build a Cartesian Style 3D printer
     
    MaryD likes this.
  21. AS-3DDruck

    Builder

    Joined:
    Mar 30, 2017
    Messages:
    8
    Likes Received:
    2
    I will build a DLP Printer with a few Upgrades.
    The Form 2 will look like something for Kids. ;)
     
    MaryD and Kyo like this.
  22. ShreddinPB

    Builder

    Joined:
    Sep 8, 2016
    Messages:
    1
    Likes Received:
    1
    Im building a convertible 40watt laser cutter and Cartesian printer, 12x24 laser/print area.
     
    MaryD likes this.
  23. alex_b

    alex_b Journeyman
    Staff Member Builder Resident Builder

    Joined:
    Jan 31, 2015
    Messages:
    48
    Likes Received:
    109
    To be used on a new custom flood coolant build I've been drooling to make forever...:D
     
    MaryD and Kyo like this.
  24. Thurmond Moore

    Builder

    Joined:
    Dec 31, 2014
    Messages:
    23
    Likes Received:
    4
    An OX!

    Thurmond
     
    MaryD likes this.
  25. Lodewyk

    Lodewyk New
    Builder

    Joined:
    Mar 25, 2017
    Messages:
    1
    Likes Received:
    1
    C-Beam, new build
     
    MaryD likes this.
  26. Average Joe

    Builder

    Joined:
    Mar 31, 2017
    Messages:
    1
    Likes Received:
    1
    Well I'm just in the process of planning a Core XY 3D printer and that smoothieboard would be an overkill that I could use to make an hybrid machine from it :)
     
    MaryD likes this.
  27. Jack0040

    Jack0040 New
    Builder

    Joined:
    Mar 31, 2017
    Messages:
    1
    Likes Received:
    1
    I've been looking towards building a corexy or hypercube, and a smoothieboard would be awesome on that!
     
    MaryD likes this.
  28. Traxxtar

    Traxxtar New
    Builder

    Joined:
    Nov 20, 2015
    Messages:
    56
    Likes Received:
    15
    I'd like to add a 4th axis to my XCarve. I need to build a new controller system to do that. This board will go a long way towards that end. I have 3 kids in college and another who's only 1.5 years away. Yikes!!
     
    MaryD likes this.
  29. Allan Tarantino

    Builder

    Joined:
    Mar 31, 2017
    Messages:
    1
    Likes Received:
    1
    I would a C-Bot.
     
    MaryD likes this.
  30. jezter6

    jezter6 New
    Builder

    Joined:
    Jan 31, 2016
    Messages:
    23
    Likes Received:
    3
    I'd like a smoothieboard to update my mostly printed cnc. It freezes too much with the RAMPS board which leaves crappy burn marks when it locks up even if it's under a second.
     
    MaryD likes this.
Thread Status:
Not open for further replies.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice