Welcome to Our Community

Some features disabled for guests. Register Today.

Chinese Spindle & VFD Setup 2016-11-16

Making sense of setting up a Chinese Spindle & VFD without the grief.

  1. Moag

    Moag Veteran
    Staff Member Builder Resident Builder

    Joined:
    Mar 16, 2016
    Messages:
    183
    Likes Received:
    294
    Moag submitted a new resource:

    Chinese Spindle & VFD Setup - Making sense of setting up a Chinese Spindle & VFD without the grief.

    Read more about this resource...
     
    Peter Van Der Walt, sunil and GrayUK like this.
  2. Saint Billy

    Builder

    Joined:
    Dec 1, 2016
    Messages:
    74
    Likes Received:
    8
    This is a great help, many thanks.
     
  3. sunil

    sunil New
    Builder

    Joined:
    Aug 16, 2016
    Messages:
    26
    Likes Received:
    11
    great read so thanks for the guide..

    just wondering if you have connected the vfd to your cnc controller board so you can activate it on the computer?

    ive got he cnc xpro2 so it would be good to control it off the pc if possible
     
  4. Moag

    Moag Veteran
    Staff Member Builder Resident Builder

    Joined:
    Mar 16, 2016
    Messages:
    183
    Likes Received:
    294
    Thank sunil, no I just flick on the the power switch in my setup and push run and adjust the speed to what I calcuated for the Gcode job, to keep it simple for me.
     
    sunil likes this.
  5. sunil

    sunil New
    Builder

    Joined:
    Aug 16, 2016
    Messages:
    26
    Likes Received:
    11
    @mong

    Just followed your guide and for the spindle spinning!

    On you guide, it say s check PD 177 to 180 however i got these messages

    pd177

    15871492_10155063042259742_6793122136682114586_n.jpg

    p178

    15977022_10155063042494742_3187219550387096826_n.jpg
    pd179
    15940899_10155063042679742_1522407899620886847_n.jpg
    pd180
    15977104_10155063042874742_7517332009352318086_n.jpg

    Any ideas what they mean??

    Thanks in advance
     
  6. Moag

    Moag Veteran
    Staff Member Builder Resident Builder

    Joined:
    Mar 16, 2016
    Messages:
    183
    Likes Received:
    294
    G'Day @sunil, not being a distributor or manufacturer of these, I can only guess...

    pd177 - ELun means?? Low voltage at constant run speed

    pd178 - ELud means?? Low voltage at deceleration

    pd179 & 180 - EErn ???? don't know, but for other EE errors, they suggest to send it back to the factory.

    So all I can suggest is,
    • make sure the VFD and spindle is rated for your countries voltage
    • check it's wired correctly with suitable wire
    • all the suggested PDs are set as they should be
    • While you're at it, go into PD172 and set to 01 to clear the recorded faults in PD 177,178,179 &180
    • Turn it off at the power point and give it a couple of minutes before turning it on again. give it a run without cutting anything and check for errors again.
    • Record the error/s again if they are still present in PD 177, 178, 179 & 180.
    • If still present post them here and we will go to the next step.
    Let us know how you go...
     
  7. Moag

    Moag Veteran
    Staff Member Builder Resident Builder

    Joined:
    Mar 16, 2016
    Messages:
    183
    Likes Received:
    294
    Oh, silly me what model/size VFD and Spindle do you have sunil???
     
  8. Moag

    Moag Veteran
    Staff Member Builder Resident Builder

    Joined:
    Mar 16, 2016
    Messages:
    183
    Likes Received:
    294
    Another thought if you're in a country with 120volt mains power you will have to set PD008 to [120] not 220 as shown in the how to guide.
     
  9. sunil

    sunil New
    Builder

    Joined:
    Aug 16, 2016
    Messages:
    26
    Likes Received:
    11
    Morning or evening for you @Moag

    Yes I've read up that the first 2 are due to low voltage but i have read that it could be solved by swapping one of the input poles.. I shall let you know soon of it works
     
  10. Moag

    Moag Veteran
    Staff Member Builder Resident Builder

    Joined:
    Mar 16, 2016
    Messages:
    183
    Likes Received:
    294
    Yep good morning to you? definitely, sun set for me on this side of the world.;)
     
  11. sunil

    sunil New
    Builder

    Joined:
    Aug 16, 2016
    Messages:
    26
    Likes Received:
    11
    yes cold rainy morning here in Leicester in the UK, where are you from Moag?

    ive got a 1.5kw air cooled spindle and a 2.2kw vfd

    i have swapped the input into the vfd as i read last night that 'T' should be used as the neutral and 'R' as the live and now no error messages stored in pd178 to 180
     
  12. Moag

    Moag Veteran
    Staff Member Builder Resident Builder

    Joined:
    Mar 16, 2016
    Messages:
    183
    Likes Received:
    294
    Summer here, south-eastern Australia (Bairnsdale, Vic)... Glad to hear it's all sorted mate, you have a good but wet day.:thumbsup:;)
     
  13. sunil

    sunil New
    Builder

    Joined:
    Aug 16, 2016
    Messages:
    26
    Likes Received:
    11
    Ah i was near you last march in Melbourne for a month
     
    Moag likes this.
  14. sunil

    sunil New
    Builder

    Joined:
    Aug 16, 2016
    Messages:
    26
    Likes Received:
    11
    got some more bits done but can say its working!

    15875769_1261788293866762_3527981841690656768_n.jpg
     
    Moag likes this.
  15. Stephen Cotterell

    Builder

    Joined:
    May 1, 2016
    Messages:
    3
    Likes Received:
    1
  16. NeeqOne

    NeeqOne Well-Known
    Builder

    Joined:
    Mar 3, 2018
    Messages:
    46
    Likes Received:
    27
    I guess this will work with the 110v spindle with some changes here and there?
     
  17. TIPRODUCTION

    Builder

    Joined:
    May 23, 2018
    Messages:
    1
    Likes Received:
    0
    If you are still interested, MakerGeek on youtube explains how he controls his spindle through the computer:


    and I also found another example here by Luke's Garage, with more info in the video description:
     
  18. DxN32

    DxN32 New
    Builder

    Joined:
    Aug 12, 2019
    Messages:
    23
    Likes Received:
    14
    I have the same question
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice