Welcome to Our Community

Some features disabled for guests. Register Today.

what kind of aluminum can c-beam cut?

Discussion in 'CNC Mills/Routers' started by Elhanan, Nov 27, 2016.

  1. Elhanan

    Elhanan New
    Builder

    Joined:
    Nov 27, 2016
    Messages:
    11
    Likes Received:
    0
    can it be used to cut this sort of plates?
    at what thickness?

    [​IMG]
     
  2. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Dec 20, 2013
    Messages:
    2,853
    Likes Received:
    1,524
    The photo is not visible as you have linked to password protected content. Try dragging the photo into the edit box instead of linking. Thx.
     
  3. Elhanan

    Elhanan New
    Builder

    Joined:
    Nov 27, 2016
    Messages:
    11
    Likes Received:
    0
  4. Ronald van Arkel

    Staff Member Builder Resident Builder

    Joined:
    May 7, 2014
    Messages:
    472
    Likes Received:
    245
    Looks like gauge 14 / ~2mm, should be easy in a few passes or when using trochoidal cutting you might do it in one pass. Just upgrade the 3mm gantry plate to a XL C-Beam plate and it should be okay to use the stock C-Beam machine.

    -Ronald
     
  5. Elhanan

    Elhanan New
    Builder

    Joined:
    Nov 27, 2016
    Messages:
    11
    Likes Received:
    0
    actually those are 12" , and if i'd like 10 gauge?
     
  6. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Dec 20, 2013
    Messages:
    2,853
    Likes Received:
    1,524
    6061 is probably the most commonly used (among forum members) because of its easy machinability. As far as thickness, pretty much any thickness is possible as you are taking it away in small bites. Thicker just takes more passes. Just be sure and keep the chips cleared as you go.

    For a better explanation on aluminum types and their workability there are plenty of websites out there with good information including Onlinemetals.

    Edit: oops I see I was typing too slow... and Ronald got back first :blackeye:
     
    GrayUK likes this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice