Welcome to Our Community

Some features disabled for guests. Register Today.

V-slot and MDF DeltaBot

Discussion in '3D printers' started by mrtinkerer, Mar 17, 2015.

  1. mrtinkerer

    Builder

    Joined:
    Aug 12, 2014
    Messages:
    9
    Likes Received:
    5
    mrtinkerer published a new build:

    Read more about this build...
     
  2. mrtinkerer

    Builder

    Joined:
    Aug 12, 2014
    Messages:
    9
    Likes Received:
    5
    I know. The v-slot fits perfectly in the MDF because of the CNC router. I don't think this build would have been possible for me without the CNC. I wanted to attach the g-code, but the site does not accept ngc files.
     
  3. Tweakie

    Tweakie OpenBuilds Team
    Moderator

    Joined:
    Jan 18, 2014
    Messages:
    784
    Likes Received:
    326
    Excellent work with the DeltaBot @mrtinkerer :thumbsup:

    Tweakie.

    (if you change the file extension to .txt you can probably attach your Gcodes if you wish)
     
  4. mrtinkerer

    Builder

    Joined:
    Aug 12, 2014
    Messages:
    9
    Likes Received:
    5
    Good point with the txt. i will do that. thank you
     
  5. mrtinkerer

    Builder

    Joined:
    Aug 12, 2014
    Messages:
    9
    Likes Received:
    5
    Good point. I build in CamBam. that has a .cb extension. Viewing the file with Notepad, I see
    <?xml version="1.0" encoding="utf-8"?>
    <CADFile xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Version="0.9.8.0" Name="effector">

    followed by a bunch of coordinates and dimensions. So it looks like it is just an xml file. I could attach those with a txt extension and see if people can do anything with it.
     
  6. dave_robinson_022

    Builder

    Joined:
    May 22, 2015
    Messages:
    2
    Likes Received:
    0
    How did you find setting up and implementing dual extrusion on a delta printer as that is the main dilemma I am having over building one at the moment; I have the E3D legends pack....
     
  7. mrtinkerer

    Builder

    Joined:
    Aug 12, 2014
    Messages:
    9
    Likes Received:
    5
    I did not set up dual extrusion. I only have one hotend.
     
  8. CNCKitCompany

    Builder

    Joined:
    Jan 22, 2018
    Messages:
    35
    Likes Received:
    11
    Hi @mrtinkerer -

    I'm browsing the delta 3D printers, as I'm looking at building one. I'm curious how your design is holding up. I was thinking I would make the top/bottom plates out of AL with my design, though MDF is a cheaper and I have the tools/machines to do the precise machining to make it fit well. I could then build my machine cheaper with MDF. So I'd love to hear a bit more of your experience and how things are holding up.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice