Welcome to Our Community

Some features disabled for guests. Register Today.

Belt vs Threaded Rod

Discussion in 'Concepts and Ideas' started by selkov, Oct 15, 2015.

  1. selkov

    selkov New
    Builder

    Joined:
    Dec 3, 2014
    Messages:
    34
    Likes Received:
    0
    So if I have a build in mind which do i choose.
    Threaded rod drive or belts?
    Which is more accurate?
    Which is smoother?
    Etc....
     
  2. Kalevra1102

    Builder

    Joined:
    Jan 20, 2016
    Messages:
    7
    Likes Received:
    0
    It depends on the application.

    Screws will give you higher torque, better precision and smother travel but it can be difficult to find long lengths.

    Belts are usually faster and cheaper but can suffer in accuracy and need to be tightened as they stretch.

    Maybe share what your build idea is for better advice.
     
  3. Christian Knüll

    Builder

    Joined:
    Mar 1, 2014
    Messages:
    27
    Likes Received:
    34
    • Threaded rods are much stiffer than belts and allow much better accuracy and deeper cuts. They also require very little attention and maintenance.
    • Belts on the other hand are usually much faster, cheaper and more convenient to assemble. Accuracy depends heavily on correct belt tension and shallow cuts -> frequent checks required.
    • Threaded rod should at least be ACME thread or if you can spend some money: ball screw.
    • Do not use threaded rods from the hardware store - they are very inaccurate and won't last more than just a few hours.
    So basically: if your focus is to safe money / just have some fun and gain first experiences go for the belts - if you need precision I'd prefer good screws (and a generally rigid machine design)
     
    Kalevra1102 likes this.
  4. Giarc

    Giarc OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jan 24, 2015
    Messages:
    2,898
    Likes Received:
    1,613
    You can get 6 foot lengths of acme rods shipped from McMaster Carr if you need something longer than a meter. However, you will need larger diameter threaded rod if you go big.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice