Welcome to Our Community

Some features disabled for guests. Register Today.

OpenBuilds Router Mount Fit Makita RF1101?

Discussion in 'General Talk' started by Josh Mascote, Nov 16, 2015.

  1. Josh Mascote

    Builder

    Joined:
    Jan 30, 2014
    Messages:
    39
    Likes Received:
    9
    Anyone know?
     
  2. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Dec 20, 2013
    Messages:
    2,855
    Likes Received:
    1,525
    I can't speak from personal experience but everything I'm seeing on it says the barrel is 3-1/4" which won't fit the 71mm mount opening. And it's not likely you're going to find any 1/2" router that will fit the Openbuilds mount. If you really want to go with this router, you might check with @Chris Laidlaw to see what mount sizes he has to offer.
     
  3. Josh Mascote

    Builder

    Joined:
    Jan 30, 2014
    Messages:
    39
    Likes Received:
    9
    Thanks, I found a mount on CNCRouterparts, but I try to keep the love here at openbuilds.
     
  4. Tracy Ranson

    Tracy Ranson Well-Known
    Builder

    Joined:
    Nov 4, 2014
    Messages:
    88
    Likes Received:
    32
    I had the same issue trying to find a mount for my makita 1.25 router. I figured that since my funds were extremely limited I needed to use materials that I had on hand and that included the actual sleeve body that the router comes with. My idea is in the prototype stage and seems to work really well. I just need to make a few adjustments and I will be ready to make the part out of .1875 aluminum plate. I have attached a couple pictures of what the part looks like and how it is attached to the sleeve and the sleeve to the z-axis v rail. I have added three additional pictures of the aluminum base that will also act as part of the mount. I had to modify the sleeve of the base just a little so that the router would be free to turn without binding. This idea work rather well and save me money that I do not have to spend. If you want a copy of the file please send me a message.
     

    Attached Files:

    #4 Tracy Ranson, Jan 29, 2016
    Last edited: Feb 1, 2016
    sunil, GrayUK and Ronald van Arkel like this.
  5. Korimako

    Korimako New
    Builder

    Joined:
    Jun 11, 2015
    Messages:
    15
    Likes Received:
    1
    great build :) I have just bought the same router and am working on mounting it, I was wondering how long can you run this router before it overheats? thank you
     
  6. Tracy Ranson

    Tracy Ranson Well-Known
    Builder

    Joined:
    Nov 4, 2014
    Messages:
    88
    Likes Received:
    32
    The makita router seems to be a better router than the bosch colt router. I have not run my router in a long term production setting just yet but I have ran it continuously for more than 6 hours without issue.
     
  7. Korimako

    Korimako New
    Builder

    Joined:
    Jun 11, 2015
    Messages:
    15
    Likes Received:
    1
    Wow 6 hours! that is fantastic thank you:)
     
  8. GrayUK

    GrayUK Openbuilds Team Elder
    Staff Member Moderator Builder

    Joined:
    May 5, 2014
    Messages:
    1,668
    Likes Received:
    627
    If needed, I guess you could always fix a 12v fan on top of the router in-take, forcing cool airflow down.
    Can only help. :)
    Gray
     
  9. Korimako

    Korimako New
    Builder

    Joined:
    Jun 11, 2015
    Messages:
    15
    Likes Received:
    1
    True!, thanks :)
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice