Welcome to Our Community

Some features disabled for guests. Register Today.

Help with Z axis

Discussion in 'CNC Mills/Routers' started by Alberto Boria, Jul 12, 2015.

  1. Alberto Boria

    Builder

    Joined:
    Aug 20, 2014
    Messages:
    23
    Likes Received:
    4
    I need help configuring Z axis with the Gecko 540. The X and Y are working great but the Z axis motor not running just hard sound but do not move. I'm using an Acme 1/2-10 rod in the Z axis. Any help would be appreciated.

    Thanks,

    Alberto
     
  2. Joe Santarsiero

    Joe Santarsiero OB addict
    Staff Member Moderator Builder

    Joined:
    Oct 30, 2014
    Messages:
    902
    Likes Received:
    196
    Is the coupling tightened while your trying to move the motor? If so, loosen it and try.

    Connect the y axis motor cable and try a move with the z motor. then try the z cable on the y motor to test the cable
     
  3. Alberto Boria

    Builder

    Joined:
    Aug 20, 2014
    Messages:
    23
    Likes Received:
    4
    Here a small video of what is doing when I try to jog.
     

    Attached Files:

  4. Joe Santarsiero

    Joe Santarsiero OB addict
    Staff Member Moderator Builder

    Joined:
    Oct 30, 2014
    Messages:
    902
    Likes Received:
    196
    I couldn't watch the .mov on my phone, but check to make sure your cable is made properly. step and direction might be wrong.
     
  5. Alberto Boria

    Builder

    Joined:
    Aug 20, 2014
    Messages:
    23
    Likes Received:
    4
    Thanks for the help I found I combine the cables wrong :banghead: that was the problem.
     
  6. Joe Santarsiero

    Joe Santarsiero OB addict
    Staff Member Moderator Builder

    Joined:
    Oct 30, 2014
    Messages:
    902
    Likes Received:
    196
    Your welcome. It happens.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice