Welcome to Our Community

Some features disabled for guests. Register Today.

ooznest OX CNC Machine

Discussion in 'CNC Mills/Routers' started by Ryan Lock, Apr 28, 2015.

  1. Ryan Lock

    Ryan Lock Veteran
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    530
    Likes Received:
    292
    I don't want to give an exact date, need see how quick we can do this first batch, i would hope within 2 weeks for the second batch.

    As tim said, 15A is sufficient.
     
  2. DazTheGas

    DazTheGas Journeyman
    Builder

    Joined:
    Jan 27, 2015
    Messages:
    75
    Likes Received:
    142
    Hi Ryan,

    What size is the drag chain on the back, is it 30 or 20?

    DazTheGas
     
  3. Ryan Lock

    Ryan Lock Veteran
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    530
    Likes Received:
    292
    It is 30x15.
     
  4. jajohnsen

    jajohnsen New
    Builder

    Joined:
    May 16, 2015
    Messages:
    24
    Likes Received:
    2
    Ryan,

    Thank you for your answer,

    It will be mostly (95%) woodworking project i would be using it for, and occasionally aluminum to make some simple brackets or some thin 1-2mm aluminum face plates (100mmx100mm). For woodworking it would be part for small keepsakes boxes and parts for small furniture and also maybe the possibility to make cabinets.
    For the small things i believe the 500x750 will be big enough, the 1500x1000 is tempting for the furniture parts. But if I wil not be able to cut aluminumparts with this, i'm leaning towards the smaller size.

    One question regards to rigidity, which axes is it the most criticall in the larger ones is it both the x and y or mostly the x on the gantry so the z axis don't twist?

    For spindle router, i'm deciding between a kress, makita,bosch or dewalt (230v version)
    For controller i'm considering g540, xpro, or pibot.
     
  5. Ryan Lock

    Ryan Lock Veteran
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    530
    Likes Received:
    292
    I think it would best best to go for the smaller one then go from there, you could even just upgrade that one to be bigger as needed. The V-Slot rails are relatively inexpensive compared to other parts on the machine.

    With the X-Axis there is a simple mod you could do to strengthen it, you could bolt the two 20x60mm rails together so they act as one. For the Y-Axis there isn't to much you can do to strengthen it, unless you lose the wheel brace, then you could add supports along it.
     
    jajohnsen likes this.
  6. GrayUK

    GrayUK Openbuilds Team Elder
    Staff Member Moderator Builder

    Joined:
    May 5, 2014
    Messages:
    1,668
    Likes Received:
    627
    Would probably be better to start with a small CBeam machine!

    Gray
     
  7. Tim P

    Tim P New
    Builder

    Joined:
    May 12, 2015
    Messages:
    34
    Likes Received:
    17
    After watching DazTheGas upgrade his OX with your plates I'm getting even more excited to receive my kit. The plates looked to be great quality and packed well. :thumbsup:
     
  8. Ryan Lock

    Ryan Lock Veteran
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    530
    Likes Received:
    292
    The first couple of kits are due to go out tomorrow. We are just getting our processes nailed putting them together, so we should get quicker & quicker at shipping them.
     
  9. Tim P

    Tim P New
    Builder

    Joined:
    May 12, 2015
    Messages:
    34
    Likes Received:
    17
    Awesome Ryan! I've got parts coming in daily now. I should have everything in and waiting on that kit to arrive. Can I upgrade to 1-day shipping to US? :ROFL:
     
  10. Justin Dewoody

    Builder

    Joined:
    May 23, 2015
    Messages:
    49
    Likes Received:
    0
    Yeah i would like 1 day shipping to the US as well...
     
  11. Ryan Lock

    Ryan Lock Veteran
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    530
    Likes Received:
    292
    I have sent you both messages regarding this.
     
  12. jajohnsen

    jajohnsen New
    Builder

    Joined:
    May 16, 2015
    Messages:
    24
    Likes Received:
    2
    Thanks for the help, just ordered my kit:)
     
  13. jajohnsen

    jajohnsen New
    Builder

    Joined:
    May 16, 2015
    Messages:
    24
    Likes Received:
    2
    Looking at spindles for my kit would a 1.5kw be to big for this or is a 0.8kw better suited?
     
  14. Ryan Lock

    Ryan Lock Veteran
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    530
    Likes Received:
    292
    A 1.5kw may be ok, do you know what the weight is? 0.8kw should be perfect.

    Best Regards

    Ryan Lock
     
  15. jajohnsen

    jajohnsen New
    Builder

    Joined:
    May 16, 2015
    Messages:
    24
    Likes Received:
    2
    there are two 1.5kw versions one with a diamater og 65mm and 2.6kg and one 80mm diamater that weights 4kg.
    the 0.8kw is 65mm and 2.8kg
     
    #75 jajohnsen, May 29, 2015
    Last edited: May 29, 2015
  16. Ryan Lock

    Ryan Lock Veteran
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    530
    Likes Received:
    292
    I would stick to the 2.6 or 2.8kg options.
     
  17. Jesper Lindeberg

    Builder

    Joined:
    Jun 1, 2015
    Messages:
    1
    Likes Received:
    0
    Where do I find the dxf files for alle the plates?
     
  18. Ryan Lock

    Ryan Lock Veteran
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    530
    Likes Received:
    292
    Hi,

    They are in the zip file under the tab "files" above.
     
  19. Kyo

    Kyo Veteran
    Staff Member Builder Resident Builder

    Joined:
    Feb 27, 2014
    Messages:
    673
    Likes Received:
    699
    I to was about to ask the same, I only see the assembly manual pdf and the parts list xls under the "Files" tab.
     
  20. Ryan Lock

    Ryan Lock Veteran
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    530
    Likes Received:
    292
    Could of swore they were there. Anyway they are there now :)
     
    GrayUK and Kyo like this.
  21. Tim P

    Tim P New
    Builder

    Joined:
    May 12, 2015
    Messages:
    34
    Likes Received:
    17
    I received my kit this afternoon and have started assembly. Really impressed so far but I've ran into a problem on the X plate. One of the two 2060 extrusions is slightly larger than the other. When I try to adjust the eccentrics to remove the wobble one extrusion will be tight while the other has play. I've confirmed it is the extrusions because I've swapped them front to back with same result happening on the opposite side. Any fixes for this? I'm eager to get this thing done.
     
  22. Ryan Lock

    Ryan Lock Veteran
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    530
    Likes Received:
    292
    I am guessing when you say one is larger than the other you mean the height not the length? If so you have a set of eccentrics for each set of wheels, each set doesn't have to be set exactly the same as each other. Therefore you could set one set of eccentrics to be slightly different than the other to adjust for the smaller/larger rail.

    Let me know how you get on.
     
  23. Tim P

    Tim P New
    Builder

    Joined:
    May 12, 2015
    Messages:
    34
    Likes Received:
    17
    The height is the issue. With one side the eccentric is as loose as possible while the other side is almost fully tightened. This still results in gripping the larger extrusion a little too tight causing friction. It will remove the wobble from the shorter one but I'm worried about wear since it still just barely grips one while being too tight on the other.
     
  24. Ryan Lock

    Ryan Lock Veteran
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    530
    Likes Received:
    292
    Yes it isn't ideal. Have you double checked that the 2 plates are square with each other?

    Also have you got a digital caliper to measure the widths of the two extrusion? if so can you report back with the values.

    If i need to send you a new rail, i would like to match it as close possible in width to one of the ones you already have.
     
  25. Tim P

    Tim P New
    Builder

    Joined:
    May 12, 2015
    Messages:
    34
    Likes Received:
    17
    They are square. I can swap the extrusions front to back and still have problems with the same piece. Using the short z axis extrusion I can get it to adjust just fine with the shorter extrusion. I do have a caliper but it'll be this afternoon before I'm able to get measurements.
     
  26. Ryan Lock

    Ryan Lock Veteran
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    530
    Likes Received:
    292
    Yup, sorry forgot you said that.

    That's fine. May be worth also measuring the shorter one as we know that one works. And i will send one to match that.
     
  27. Tim P

    Tim P New
    Builder

    Joined:
    May 12, 2015
    Messages:
    34
    Likes Received:
    17
    Update: Problem is hopefully being resolved with 2 new extrusions for the X. Many thanks to both Ryan Lock and Mark Carew for the wonderful support!

    I did finish my build so that I could wire everything up and get it connected to the g540 and pc. Everything is working as it should. 20150605_231211.jpg

    This is the finished kit before I wired the electronics. Once the extrusions are replaced I'll be able to mount my router and make my first cut :thumbsup:
     
    Eyesaw, GrayUK and Mark Carew like this.
  28. Ryan Lock

    Ryan Lock Veteran
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    530
    Likes Received:
    292
    Thanks for the pic, glad the rest went smoothly.

    Looking forward to seeing it cut!
     
  29. cruz1445

    cruz1445 New
    Builder

    Joined:
    Mar 25, 2015
    Messages:
    23
    Likes Received:
    6
    Received my kit yesterday and will be starting build today. I must say this thing was packaged extremely well and plates look flawless. The instruction manual is also really nicely made. Really pleased with it so far.
     
    Ryan Lock likes this.
  30. Ryan Lock

    Ryan Lock Veteran
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    530
    Likes Received:
    292
    Glad it arrived safely, i hope the build goes well for you. Any problems, don't hesitate to contact us.

    As an update for anyone on here waiting on their kit, we have shipped exactly half the pre-orders so far. We expect to have the rest of May pre-orders shipped within 2 weeks, june orders a bit later.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice