I didn't open a ticket because I believe I missed something on this, when I start a job using the interface and after probing with xyz probe the bit stays too high like kept the zero reading from the top of the probe without deducting the thickness of the probe. I'm using blackbox32, interface and probe xyz from openbuilds.
After done probing I get this: X -0.02 Y -0.02 Z 14.00 PS Just added pictures of the interface screen
Found the problem.....user error!!! I had the steps wrong and I used the wizard to calibrate. Z moved 5 mm when should be 20mm and the other axes moved 67mm when should be 100mm.
