Welcome to Our Community

Some features disabled for guests. Register Today.

2 Axis Lathe cutter

Discussion in 'CNC Lathes' started by Nick Cipolla, Jul 11, 2022.

  1. Nick Cipolla

    Builder

    Joined:
    Jul 11, 2022
    Messages:
    7
    Likes Received:
    8
    Nick Cipolla published a new build:

    Read more about this build...
     
    Peter Van Der Walt likes this.
  2. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,742
    Likes Received:
    2,407
    Perfect use of the OpenBuilds System! Nice job Nick
     
  3. Nick Cipolla

    Builder

    Joined:
    Jul 11, 2022
    Messages:
    7
    Likes Received:
    8
    Thanks, we had been looking for a solution for a while and I made the suggestion to look at home built CNCs. so far it has worked out well. Next we are planning to add the interface and potentially some kind of water dispenser at the end of the blade to keep the tools cool.
     
    Mark Carew likes this.
  4. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,742
    Likes Received:
    2,407
    Very nice! I always love a purpose built machine like this and that you married the old and new together is really cool to me. Thanks for sharing looking forward to updates as they happen
     
    Nick Cipolla likes this.
  5. JustinTime

    JustinTime Veteran
    Builder

    Joined:
    Dec 18, 2013
    Messages:
    756
    Likes Received:
    252
    I wonder why the Y C-beam is so long. Isn't it way past the max swing of the lathe? Are you going to use some special cutting tools?
     
    Nick Cipolla likes this.
  6. Nick Cipolla

    Builder

    Joined:
    Jul 11, 2022
    Messages:
    7
    Likes Received:
    8
    the y axis is the full length of the table that the lathe is mounted to, the initial idea was that the x-axis was going to be manually controlled so we would have been able to use a bit more of the length, but we have since added a stepper motor to the x-axis. currently we have a small aluminum vise mounted and several different knives (depending on the type of rubber we are cutting). This rig basically replaces the need for a $100,000+ mitchel cutter machine and we can generally get cuts accurate to +/- .070".
     
  7. AMW1993

    AMW1993 New
    Builder

    Joined:
    Jul 13, 2022
    Messages:
    2
    Likes Received:
    1
    Nick,

    if you're still out there, would you please provides some advice on the software you are using? I have a similar build (although i kinda like yours better), and I'm having a difficult time running toolpaths in fusion 360. I've attached my file, in case anyone out there may be able to help.

    Thanks,
    AMW
     

    Attached Files:

    Nick Cipolla likes this.
  8. Nick Cipolla

    Builder

    Joined:
    Jul 11, 2022
    Messages:
    7
    Likes Received:
    8
    the only software I'm using is Open Builds Control, I figured out how to write the jog commands in grbl and have been using a series of simple jog commands saved as a macro to run my cuts.

    example: this moves my blade into the material to cut, backs it out , moves it to the next cut, repeats then returns everything to zero.

    $J=G91G20y.87F10
    $J=G91G20y-.87F100
    $J=G91G20x2.23F5000
    $J=G91G20y.87F10
    $J=G91G20y-.87F100
    $J=G90G20Y0F5000
    $J=G90G20X0F5000
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice