Welcome to Our Community

Some features disabled for guests. Register Today.

XYZ movment error

Discussion in 'CNC Mills/Routers' started by Antony Lidorginakis, Nov 25, 2020.

  1. Antony Lidorginakis

    Builder

    Joined:
    Aug 28, 2020
    Messages:
    5
    Likes Received:
    0
    why this gcode lines is giving me an error at startup ? and how can be resolved?

    (Profile 1)
    (Tools used in this file: )
    (2 = End Mill {0.5 inch})
    N100G00G20G17G90G40G49G80
    N110G70G91.1
    N120T2M06
    N130 (End Mill {0.5 inch})
    N140G00G43Z2.0000H2
    N150S12000M03
    N160(Toolpath:- Profile 1)
    N170()
    N180G94
    N190X0.0000Y0.0000F250.0
    N200G00X0.1432Y16.6013Z2.0000
    N210G1Z-3.0297F200.0
    N220G1X0.1401Y16.3156Z-2.8691F250.0
    N230G1X0.1378Y16.1014Z-2.7544
    N240G1X-0.2013Y16.1011Z-2.7542
    N250G1X-0.3073Y16.0981Z-2.7543
    N260G1X-0.4306Y16.0902Z-2.7543
    N270G1X-0.4482Y16.0890Z-2.7448
     
  2. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    13,754
    Likes Received:
    4,070
    You need Grbl compatible GCode - what CAM are you using? The Gcode above contains invalid commands like G70, that is not supported by Grbl: See about halfway down on the Grbl Wiki

    We have Grbl Post processor files for Fusion, Vectric, etc
    You just need to use a Grbl post for your CAM, if it does support the option, otherwise, find a CAM that has support for Grbl: See docs:software:overview [OpenBuilds Documentation]
     
    David the swarfer likes this.
  3. Antony Lidorginakis

    Builder

    Joined:
    Aug 28, 2020
    Messages:
    5
    Likes Received:
    0
    Thank you very much!!
    How can i make the Z to go up 5cm while is cutting a straight line
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice