Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

Recent Content by ymilord

  1. ymilord
    Post

    Rack and Pinion (Death to Belts)

    Did this a couple years ago. Kyoujin Mk1 (C-Beam /w Rack & Pinion)
    Post by: ymilord, Dec 18, 2018 in forum: CNC Mills/Routers
  2. ymilord
    Post

    Kyoujin Mk1

    Added logos to the machine. [ATTACH] Electronics Enclosure. [ATTACH]
    Post by: ymilord, Apr 26, 2018 in forum: CNC Mills/Routers
  3. ymilord
    Post

    C-Beam Rigid - 'The Hog'

    Yup from CNCrouterparts. As far as mass-produced, That one pallet cost me over 200 bucks. The guy that machined the one said I'd have to buy over...
    Post by: ymilord, Apr 26, 2018 in forum: CNC Mills/Routers
  4. ymilord
    Post

    Kyoujin Mk1

    Long overdue update. [ATTACH] [ATTACH] The changes since the last post. I've added a wireless touch probe. The one I made I ended up giving to...
    Post by: ymilord, Apr 25, 2018 in forum: CNC Mills/Routers
  5. ymilord
    Post

    Kyoujin Mk1

    Next step in the evolution of this machine. [ATTACH] [ATTACH] [ATTACH] The mount will be identical to the one used on the Hog. And the game plan...
    Post by: ymilord, Apr 25, 2017 in forum: CNC Mills/Routers
  6. manoj9585
    Build

    C-Beam Rigid - 'The Hog'

    Build Author: ymilord, Apr 25, 2017
    The Hog. Specifically designed to handle large stocks of 5051/6051. [ATTACH]
  7. ymilord
    Post

    Kyoujin Mk1

    Quick visual update. All of the encoders are mounted. All axis are calibrated. The closed-loop is setup up for velocity and torque mode. I've also...
    Post by: ymilord, Sep 30, 2016 in forum: CNC Mills/Routers
  8. ymilord
    Post

    C-Beam Rigid - 'The Hog'

    Well yeah. The whole point of getting that made and that thick was to get a absolutely flat surface to re-tram the machine too. Then having the...
    Post by: ymilord, Aug 27, 2016 in forum: CNC Mills/Routers
  9. ymilord
    Post

    C-Beam Rigid - 'The Hog'

    Designed it and had it made but the same shop that milled out the mini pallet for me.
    Post by: ymilord, Aug 26, 2016 in forum: CNC Mills/Routers
  10. ymilord
    Post

    C-Beam Rigid - 'The Hog'

    Thanks. Here's the new plate installed. [ATTACH] (You can see Kyoujin phoot bombing in the background.)
    Post by: ymilord, Aug 25, 2016 in forum: CNC Mills/Routers
  11. ymilord
    Post

    C-Beam Rigid - 'The Hog'

    I have not measure the RO. But it's been cutting perfectly. [ATTACH] [ATTACH] MIC6 Mini Pallet. Super flat. Super Stiff. It will have a built-in...
    Post by: ymilord, Aug 24, 2016 in forum: CNC Mills/Routers
  12. manoj9585
    Build

    Kyoujin Mk1 (C-Beam /w Rack & Pinion)

    Build Author: ymilord, Aug 24, 2016
    C-Beam based CNC with Rack & Pinion (for the X Axis) and lead screws (for the Y Axis) [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
  13. ymilord
    Post

    Kyoujin Mk1

    [MEDIA] Small test of the X Axis. Basically jogging out to 25mm & a couple random distances then back to G54 P1.
    Post by: ymilord, Aug 23, 2016 in forum: CNC Mills/Routers
  14. ymilord
    Post

    Kyoujin Mk1

    @Joe Santarsiero [ATTACH][ATTACH] On the encoder end there is a 'socket' that mates up to the collar. The kits comes with adapters that can go...
    Post by: ymilord, Aug 20, 2016 in forum: CNC Mills/Routers
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice