Separate names with a comma.
Some features disabled for guests. Register Today.
Thank you. There it is! You never sleep! Up and running again.
(C-Beam XL with NEMA 23 High Torque Steppers, Blackbox controller, and Mean Well LRS-350-24 power supply) I am now attempting to connect the NEMA...
I bought the 24V / 14.6A Power Supply for use with my C-Beam XL, but I have not connected it yet.
I have used Sketchup for non-CNC projects occasionally for about 2 years. It is free and it works. I installed the free SketchUCam plugin...
My C-Beam XLarge* is more than 90% complete mechanically, and I hope to use: 4 high-torque NEMA 23s (two on the Y axis) * 24V / 14.6A Power...
I only cut one, but there was room to cut two at the same time. I used a trigger clamp to keep it from moving.
Yes. I bought a yellow plastic mitre box and a 32 tpi hacksaw blade at Home Depot, carefully cut a piece of v-slot, and was surprised that it was...
Thank you for posting your settings.
I do appreciate some of the advantages of your design. My build of the C-Beam XL is in the early stages, and I tend to do things very slowly and...
Bigger is sometimes better. There might also be interest in a larger format CNC machine that can easily be converted to an intermediate size,...
As a little bit of background information, closed-loop position detection systems with DC (brushed) motors are commonly used in printers. As you...
OpenBuilds DryIce1
OpenBuilds DryIceOne
OpenBuilds DryIcePro
