Separate names with a comma.
Some features disabled for guests. Register Today.
From what I've read from other people's experiences with PEI, PLA doesn't stick well unheated, but, you could always use gluestick for PLA, but...
I have had to level my bed a few times... but they were all my fault, and I'm not using particularly stiff springs.
On my titan, I don't use anything to hold the tube up, but I use the holder from the Rework stls to hold the wiring bits
misumi is compatible with v slot, you would want to use the 20mm 5 series, the 2020, 2040, and 2060 all match in dimensions and slots, they are...
The Google+ group is organized by category, and every post is individual, with its own lines of comments, and I haven't run into any issues with...
Are you using an actually smoothieboard? The configs are slightly different depending on which control board you're using, I'm running...
I think it looks good, I didn't know Google+ communities were searchable... or could have multiple sections. But with things being split up like...
If you go this route, you really should design and build it in a CAD program first, it doesn't really matter which one you use, but because of the...
If you don't have access to a 3d printer already, the voxel looks like it may be easier to go with, you could always build a C-Bot later if you...
He has made some motor brackets and bottom bracings that look rock-solid and because they're one-piece and everything is a tight fit, they come...
The pricing for the printer neglects the cost of the printed parts, it assumes you'll be printing them yourself, or getting a friend to print them...
Hmm, my parts are printed in makergeeks black pet... 40% triangle infill, .2mm layers, 2mm top/bottom/sides, .5mm nozzle I can use a 42mm nema 17...
Yeah, it looks like it may have been a stepper vibration thing then, here's the stepper I use with my Titan extruder:...
I'm running an E3D titan with a pancake stepper, and I don't see a pattern like that one mine, but any pattern is kind of hard to see on my prints...
I may have thought up a solution to my problem... I was thinking I could use a routing bit (on say a dremel) with a 45deg bevel on it, and another...
