Separate names with a comma.
Some features disabled for guests. Register Today.
Progressing slightly, Ballscrews on all Axis, just need to tram it all up. And then I can cut the new side frames for the final machine 800mm x...
I, like others have bought this kit as a start in the CNC world, I have enjoyed using the basic C-Beam, but now I have upgraded both the X and Y...
Not sure how good these are but these might do you as a stop gap...
could you post the G-Code or pm it, with it being the same in X and Y is strange and not something I have seen, unless the CAM software has a...
and maybe mark the starting position on the X C-Beam then move 2" and mark it again, measure the movement, is it off by 1/16? are any of the...
I am having to make some assumptions, 200 steps per mm, I assume you have no micro stepping on the stepper drivers -OOOps I make it 8...
Can you post your grbl settings?
I have a Kress 1050, I love the spindle, it is very capable and if you search my posts I have commented on the Kress and its mounting already, but...
Looks Nice, Your English (translated by Google) is much better than my Chinese, your Build looks good, I am interested in the bearings and wheels?...
I mounted mine on the side of the Y C-beam with a small section of 90 deg angle on the bottom of the build plate to hit the switch, that way you...
mine is no longer a standard C-Beam, but I have all my electronics in a separate case for protection against the dust and metal shavings I expect...
if I use Chillipeppr to view the toolpath, it looks fine see image. so I have to agree with @dddman it does look like you missed steps. now you...
Any chance you could post the G-Code as well or PM it to me. Michael
I had a similar issue, but found the collars on the lead screw were loose just ever so slightly and moved. if they aren't tight, the screw pushes...
I have never seen anything like that either, but 296x222[ekm].jpg']THIS image gives it away, still not exactly sure how it works. Michael
