Separate names with a comma.
Some features disabled for guests. Register Today.
I realized I jumped one step ahead in my problem description. Prior to my upgrade for the larger gantry and spindle, I had Mach3 and Gecko with my...
Below are the specs of my motors, very similar to sitoru and you said they were good. [ATTACH] [ATTACH]
On my initial setup, I had two V-Slot Linear Rails sandwiched together. Router was mounted on V-Slot Gantry Plates with Xtreme Solid V Wheels. I...
Prior to my BB, I also had a Gecko 540 running on windows. The PS was also enclosed with the Gecko and my jobs were also stopping randomly and...
I had one similar to that one and it didn't work. Like you said they aren't all the same, so mine didn't work.
In my initial BB setup, I had my power supply close to the BB. The power supply was causing some EMI interference to the BB and my jobs were...
Thanks, will try this when installing.
But how do you adjust master/slave without stalling one of the two and causing a misalignment when one of the two stall?
Is there any BB documentation (other then the assembly guide) I can download? I'd like a version I can install on my PC when not connected to the net.
Ok I see, thanks for the quick reply.
I'm in the process of cutting one for my CNC, but I don't see in the video or discussions what you are using to put in the pin holes. I see on the...
I'm about ready to start my build, but I noticed that the pivot point of the scissor legs are not centered. Any reason why they are not centered?...
Coool project, looks like a pro table; probably better than many tables sold. I'm using a similar system to build a scissor lift table to make...
I know you mentioned in an earlier post that you plan on making a fume extractor to control dust. How much dust/fume is it actually making without...
PCB's can be done using your regular router, just need a smaller collet to accept the tiny bits. I've done some with my 2 1/2 HP router without...
