Separate names with a comma.
Some features disabled for guests. Register Today.
Here's how I connected caps to my limit switch inputs. They're .47 uF 63v electro's but any voltage above 6v should work fine. Make sure you have...
Try Try removing the wires from the limit switches and E stop at the controller board. See if that improves the situation. When I first wired my...
Just curious , has anyone successfully printed 3d with their OX?
I've had some trouble with belt slippage lately and thinking of going to a dual belt system. Does saw dust and chips cause a problem if it gets...
I think if we could define a systematic method of testing these solutions and have a cost vs performance chart, it would certainly help with...
My CNC pro card has been a bit of a problem from the start. Mostly overheating or loosing its way, even converting to inches halfway through a...
If you have the room, how about a cover that slides sideways to give full access to the machine. This would make cleaning the tracks out a lot...
A really nice build, the cable chain really cleans things up
If Ex music teacher Steve of Clayton, Australia is listening, give me a call..
I'm having too much trouble with my cnc xpro drivers and thought I might pick up a set of TB6600 drivers from ebay. The prices vary quite a bit...
having trouble with my A channel, keeps shutting down, even with the current setting at 40 %, its not the stepper, as I've swapped it over with...
I've been throwing a rag over the wheels and drive, as one of my projects has a deep gouge when a big chip got thrown onto the track. I LOVE...
If anyone in Melbourne -Aust needs heatsink glue, I can give you what I have left over. I bought a tube and only used about .5 ml, It will just...
An interesting observation- I was trying to get my limit switches running yesterday, (I've got the cnc xpro card) and had the fans disconnected. I...
