Separate names with a comma.
Some features disabled for guests. Register Today.
Working on v3 of the Cheap Plywood 3040 CNC Router. This version is a step forward and a step back from version 1 and 2. It uses 1 inch...
[IMG] The plastic rollers are not cutting it to take the router to the next level... So came up with this idea. Similar to the V groove but...
[IMG] Ran into a few issues with the gantry at this size. The aluminum twists with the weight of the 6 kilo 1.5kw spindle. The rollers also...
I am currently lusting for a working Ramps 1.4 Arduino Mega GRBL setup with the LCD menu and SD card reader enabled, much like the Marlin firmware...
Nearly done with my 2.5x1.5 meter router. Inspired by the Ox. Y axis substituted with 2 pieces of 30x60mm bosch profile and open builds rollers...
had a few issues with belt tension and the z flexes a tiny amount... got mostly fixed now, some tiny deflection still on certain cuts, but its...
[MEDIA] Test run
1 mm second, single pass 75% power, no air assist.
[IMG] Well to those who said it could not be done... Used a cheap $400 k40 co2 laser to cut 12mm acrylic and 6mm acrylic parts for my open...
I need to cut 1/4 inch aluminum tubing to use as a spacer in my linear guides. I tried 3 d printing a jig with my tubing cutter but the tubing...
