Welcome to Our Community

Some features disabled for guests. Register Today.

Mophorn A2-8040 VFD Setup with Blackbox

Discussion in 'CNC Mills/Routers' started by ward0n, Jul 26, 2020.

  1. ward0n

    ward0n New
    Builder

    Joined:
    Mar 20, 2018
    Messages:
    4
    Likes Received:
    0
    I am setting up a Mophorn 220v 4KW air cooled spindle with an A2-8040 VFD
    Have read through the Openbuilds documentation for setting up the 0-10v analog signal to the Toolhead
    and have watched and read the manuals for the Huanyang & YL620-A VFD setups I found on the forum.
    I have identified 3 out of the 4 same terminals on my VFD compared to the others and I'm not seeing the additional GND connection, or don't know which terminal to pair with the GND I do have. I have included photos of the documentation and schematic. Would anyone have any insight or recommendations on how this would be setup? IMG_20200726_084457209.jpg IMG_20200726_084433305_HDR.jpg IMG_20200726_084621209.jpg IMG_20200726_084631233.jpg
     
  2. Peter Van Der Walt

    Peter Van Der Walt OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Mar 1, 2017
    Messages:
    13,751
    Likes Received:
    4,070
    Might be best to confirm with the VFD supplier. But in the absense of other GND pins, i suspect you can just gang up all the GNDs as a common GND. They may just have been displayed seperately in the schematic to avoid clutter
     
  3. ward0n

    ward0n New
    Builder

    Joined:
    Mar 20, 2018
    Messages:
    4
    Likes Received:
    0
    Thank you for the reply! I was considering the same thing with the common GND. I will give it a shot next weekend.

     
  4. Scot Paxton2

    Builder

    Joined:
    Dec 13, 2020
    Messages:
    21
    Likes Received:
    3
    How did you make out? I would be interested in seeing some pictures if you are willing to share your outcome as I am trying to do the same. Thanks in advance.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice